12v 24v diy rf 433.92mhz remote wireless 3 channel way 8A each 24A total Sync led light remote controller single color dimmer

RF LED DIMMER

RF Dimming Controller adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt handheld wireless touch remote control and Wall-mounted touch panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. Particularly, there is a sense light in the remote control center. It shows the exactly light which been touched. As the led strip is the same. Further, there are 3 dynamic modes in the mode button, and the speed is adjustable. In order to achieve the synchronization of more lamps, RGB Amplifier can be used

Product Feature

1. Designed for single color constant voltage LED lights, Working voltage DC12-24V.

2. Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.

3. Adopts RF 14keys remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters.

4. Memory function, each time power-on reserve the mode which stop in the last power-down.

5. Long-press the brightness and speed key can get the fast adjustment, convenient for operation.

6. Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.

7. Warranty of this product is two year, exclude the artificial situation of damaged or overload working.

Technical Parameters

Controller

Remote control

Interface Specifications

Direction for use

1. Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;

2. Adopts RF remote technology, 14 buttons in total.

The function of buttons are shown as below:

Typical Applications

Power and LED’s connection diagram:

Conjunction diagram: