3.5" Low Voltage New Construction Non-IC Housing

Housing

Die-formed aluminum for maximum heat dissipation and rust protection

Designed for remodel installations and suitable for using in non-insulation covered ceilings

Housing can be installed in 1/2" to 1-3/8" thick ceilings.

Housing is Non-IC rated must be kept at least 3" away from insulation

Hanger Bar

Allow housing to be positioned and locked at nay point within a 24" joist span.

Can be shortened for 12" joists

Can be positioned on long or short axis of the housing

Contain integral nail

Hanger fit onto T-bar spline for quick alignment

Junction Box

ETL listed for through branch wiring

2 in-2 out or 4 in-4 out J-box for your better choices

Designed for straight through conduit runs

1/2" and 3/4" romex wiring knockouts

Pre-wired junction box provided with removable access plate

Knockouts equipped with pry out slots

All leads are #18AWG wire, ground wire is connected to the bottom, quick connectors are supplied on all leads

Transformer & LED Electronic Driver

Magnetic Transformer

Electronic Transformer

LED electronic driver for use with 12V MR-16 LED Lamps

Class 2 15W max Load driver

Full rage ELV dimming to 10%

Dimming in 120V only

Lamp

LED MR16 Lamp 10W max MR16 Incandescent 37W max

GU5.3 socket

CRI>80%

PF>0.9

Color Temperature: 2800K-6500K

Listing

ETL listed for damp location W/Feed through

We welcome your E-mail!!!