Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Type: |
Array |
Product Details
- Type:
- Aviation Obstruction Lights
- Input Voltage(V):
- DC6V
- Lamp Power(W):
- 10
- Lamp Luminous Flux(lm):
- 1
- Lamp Luminous Efficiency(lm/w):
- 1
- CRI (Ra):
- 1
- Color Temperature(CCT):
- Red
- Beam Angle(°):
- 360
- IP Rating:
- IP65
- Certification:
- BV, CCC, CE, SASO
- Emitting Color:
- Red
- Lamp Body Material:
- Plastic and Stainless Steel
- Base Type:
- Others
- Light Source:
- LED, Bright LED
- Place of Origin:
- Hunan, China
- Brand Name:
- CK
- Standard:
- FAA,ICAO Standard
- Light Color:
- Red
- Vertical Beam Spread:
- ≥10°
- Horizontal beam angle:
- 360°
- Flashing Frequency:
- 20fpm 40fpm 60fpm steady
- Lifespan:
- >100,000h
- Light intensity:
- 10cd 32cd 200cd
- Operating Voltage:
- DC6V
- Power Consumption:
- ≤5w
- Supply Ability:
- 10000 Unit/Units per Month
- Packaging Details
- Corrugated box&wooden carton
- Port
- Shenzhen,Guangzhou
- Lead Time:
Quantity(Units) 1 - 100 >100 Est. Time(days) 15 To be negotiated
Application
It is suitable for installation on fixed buildings, structures, such as electric power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles to warn the aircraft.
Key Feature of CK-15-T
1.Overview
Feature:Low power, easy to install, Solar Powered.
Application:It is suitable for installation on fixed buildings, structures, such as electric power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles to warn the aircraft.
Name:Solar Power low Intensity Obstruction lights(Solar Power Supply)
Operation Environment:
Working temperature: -40 ° C to +55 ° C; Relative humidity: 0% ~ 95%;
Wind power: no more than 240km/h; rain: exposed to rain in any wind direction;
Salt spray: exposed to salt spray; irradiation: exposed to solar radiation.
Working conditions: input voltage: solar DC6V
2.Safety precautions
l Avoid installing at the top and bottom of the building. If installed on the top floor of a building, it is best to connect the ground wire to the lightning protection or install a lightning rod to avoid lightning strikes.
l When working on the product, it is strictly forbidden to open any part of the lamp body to prevent danger.
l This product will have a temperature rise during operation, which is normal.
l This product is a sealed structure. Non-professional maintenance personnel should not disassemble it. Once found, the company will not guarantee it.
3.Structure
|
4.Technical Feature
a) Main Feature
- Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well.
- House of the light is made of 304 stainless steel and aluminum alloy, the structure is high strength ,resistance to corrosion.
- Using special Pb battery with micro power consumption solar charging and discharge circuit protection, long life span and saving energy.
- Reflector used ABS material, with vacuum coating.
- Used micro consumption smart control system, and managed it exactly, low power consumption and energy saving.
- Four solar panel, which is full used in light.
- Light source adopts LED with long lifespan ,lower power consumption and high efficiency.
- Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.
- The circuit of the light has surge protection whose lightning proof ability is inside.
- Light on at night with whit, off in the daylight, having monitoring function
b) Main Parameter
Item | Parameter |
Model | CK-11L-T |
Operating Voltage | DC6V (Solar Power) |
Power Consumption | ≤5W |
Flashing Frequency | Steady Light |
Light Source | Red LED |
Peak Light Intensity | >100,000hours |
Emitting Color | Red |
Beam Angle | 360 horizontal beam angle |
≥3 Degree vertical beam spread | |
Installation Size(mm) | Φ127mm 4×M10 |
Overall Size(mm) | 195*195*393mm |
Ingress Protection | IP65 |
Lightning Protection Level | 10KA |
Light Controlled Sensitivity | 100Lux |
Operating humidity | ≤95% |
Operating Temperature | -40C~ 60C |
Net Weight | 8kg |
Wind Load | 80m/sec |
Electric discharge protection after enough time | Sun 30 hours in the sun |
Project Pictures
Recommend Product
Double Solar Power Medium Intensity Obstruction lights | Type A high intensity Obstruction lights |
Type B Solar Power Medium Intensity obstruction lights |
Why us?
1.Have 1 office and 2 factory,total 6000 square meter
2.Have Own R&D Department,We can research the new product by ourself.
3.Have own optical laboratory
4.Have own QC Team
5.Supply Communication Tower,Transimission Towers,Chimney,Building Designing for Aviation obstruction lights.
6.7/24 hours Sales Team and After-Sales Team
Product Warranty
- Full warranty 3 years: We will provide Full three years’ guarantee for free that product is problem caused by quality.
- Free Maintenance 5 years: From the 4th year to 5th year, We will provide product maintenance for free, when it’s damage by improper using or some other
reason.(Note: Client should pay the freight to send product back) - When you use our product and have a failure, please contact with us. Don"t take it apart and repair it by yourself, Otherwise, we are not responsible for warranty.
Contact Us
Contact Person: Jodie Shaw Whatsapp:+86 15907360172 Wechat:008615907360172 Skype ID: ucanter-parts Phone:86-15907360172 Tel:+86-0731-85563265 Fax:+86-0731-85563365 Website:https://www.cdt-en.com https://www.chendongtech.com |
Customer Reviews total 0 items