20W flood light emergency backup kit lighting batteries pack with dry battery pack    

For example as following ; 

 Specifications 

Emergency Kit for External Driver LED Products

1.Model: EME-**

2.Instruction manual

Product name: Emergency lighting module for LED downlight,LED Panel,LED Ceiling light ect...

3.Product highlights

1. According to EN60598; EN 55015; CE;

2. Deep discharge protection

3. Operation time (discharge):1-3hours(Customized within 3hrs)  

4.Lumen Factor: 20%

4.Specification

Voltage: AC 220-240 V 50-60Hz

Self consume power: <5W

Batterycharging: 24hours

Discharge current: 70mA

Suitable light source: LED downlight

Batteryspecification: Ni-Cd9.6V 1700MAh HT (High temperature)

Environment temperature: -10…+55℃

Highest surface temperature: 70℃

LED charge monitoring

Batteryprotection device equipped

Test switch: switch between emergency and normal lighting function, should have normally open switch

Applied LED downlight range:5-30W

5,Usage range:

1. Hotels

2. Conference/Meeting rooms

3. Factories & Offices

4. Commercial Purposes

5. Residential/Institution Buildings

6. Schools, Colleges & Universities

7. Hospitals

8. Places where energy saving and high color rendering index lightings are required 

6.Installing size (mm)

7.Connection drawing

8. APPLICATION GUIDE

8.1.Install the unit according to wiring diagram, any improper wiring may lead to permanent damage to the unit;

8.2.Normal AC mains supply, the inverter allows the battery pack charging,trickle charge to maintain battery

performance.Sudden interruption of the mains AC,then the inverter converts DC battery powered to ensure that

lighting and security;

8.3.Inverter with multiple protection functions:charge protection,discharge protection, short circuit protection;

8.4.To ensure maximum performance of the built-in battery, please fully charge the unit for 24hours after first

installation;To extend battery life,please make sure charge the battery at least one time every three months;

8.5.Don’t install top of the high temperature objects.Please ensure that the operating ambient temperature is below

50ºC, and maximum case temperature (tc) not exceeding 70ºC;

8.6.Do not operate this unit beyond the operating supply range;

8.7. In normal use, the battery can be done 500 charge/discharge cycles

8.8. Inverter life is more than 4 years

8.9.If experience any problem during use,please contact with supplier for help.

 Certification: