Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
New 2.4G RF 4 zones led remote control RF RGB LED Controller 4 in 1 DropLUX DLV003
RGB controller Wireless RF controller IR remote controller LED dimmer,
RGB amplifier SPI controller LED Audio Controller DMX512 decoder
Constant current RF dimming driver for DIM/CCT:
RF 2.4G SYNC dimming driver (DIM) RF 2.4G SYNC dimming driver(CCT)
RF 2.4G remote control RF 2.4G multiple-zone remote control
Our advantage:
HX-DLV003-RFBK
4 in 1 2.4GHz wireless-sync-control RF remote controller-DIM/CCT/RGB/RGBW
Controller adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power input and output with five interfaces, including V+ is extremely common interfaces, the other four for the 4 channels output control interface. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through RF remote control. Especially, it is integrated 4 optional programs for different color type LEDs, contains single color/CW+WW/RGB/RGBW. It means only one item stock for 4 types applications.
It means only one item stock for 4 types applications.
Product Feature
l Designed as 4 in 1 controller for DIM/CCT/RGB/RGBW constant voltage LED lights.
l DC12-24V, four channels output, Max. load current: 4CH*6A; Max. load power: 288W/12V; 576W/24V.
l Adopts RF remote control, no need line-of-sight. Control range up to 20 meters.
l Wireless-sync-control in both static color and dynamic modes, unlimited by remote control distance.
l Memory function, each time power-on reserve the mode which stop in the last power-off.
l Perfect control effect, including 1024 static colors(RGB/RGBW) and soft dim function.
l The brightness of static color is adjustable, 1024 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.
l Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
l Short circuit protection.
l Warranty of this product is three years, exclude the artificial situation of damaged or overload working.
Technical Parameters
Interface Specifications
Direction for use
Step 1: Connect the load wire at first, followed by the power wire, please ensure short circuit can not occur between wires before turning on the power;
Step 2: Setting the type of output as blow, please ensure the DIP switch in correct state according to the loading LED’s type:
Step 3: Matching the code with remote. The receiver can not be controlled by remote control before this step. Matching code operation will set correct program in remote control according to receiver’s output type and also achieve unique-control. Please read “About RF code” part for operation instruction.
(Tips: Please ensure to set output type before matching RF code, or will be asked for re-matching operation)
RF remote button functions
1 color ring and 12 buttons in total, the function of buttons are shown as below:
Type 1: Single color
Type 2: CW+WW
Type 3: RGB
Type 4: RGBW
Typical Applications
About RF code.
The biggest advantage of this system is that it can not only solve the cabling problem in engineering wirelessly, but also realize a wired-like operation experience. In order to facilitate the early testing and debugging of the project, the factory status of the receiver is normally unpaired and each remote controller has a unique code value. The user should perform the matching work of the remote controller and the receiver during the installation of the project to avoid the mutual influence of the radio frequency remote control technology during the later use.
Please pay attention to the following 3 points before operation:
1) All equipment in the complete system after installation should have a unified and unique code value, so as to achieve the security and stability of the system.
2) The receiver can only store one code value and cannot be overwritten. Before learning the new code value, it is necessary to clear the original code of the receiver; the remote controller can only save one code value but can be overwritten and can also restore the factory settings. In order to facilitate the later maintenance, the three components that may be involved in the system (including receivers, handheld remote controllers, and panel remote controllers) can realize mutual learning of code values.
3) Since the receiver performs code value learning in the power-on state, in order to avoid confusion in the area, it is recommended that each area has an independent power switch so that the power of other areas can be easily cut off when the code is being operated.
(1)Code pairing operation: means that the receiver will only be controlled by the value code remote controller.
|
Step |
Operation |
Instructions |
|
1 |
Connecting the load to the receiver and power on it. |
1.It is necessary to clear the code first, if the receiver was coded before. 2.Batch operation can be performed within the remote control range. |
|
2 |
Select area |
Select the area with the "Zone" key and the corresponding indicator lights up |
|
3 |
Press and hold “ON” on the remote control for 5 seconds, the indicator of the remote control will flash quickly, means it enters the pairing code transmission status. |
Will automatically exit code transmission status after 60 seconds, or pressing any key to exit. |
|
4 |
See the load light flashes 3 times and return to the initial state |
Pairing coding is finished successfully |
(2)Code clearing operation: means that the original code value of the receiver will be cleared and returned to the factory state. Then it can be controlled by any compatible remote controller, and can learn to a new code.
|
Step |
Operation |
Instructions |
|
1 |
Connecting the load to the receiver and power on it. |
1. The clearing operation should be finished within 2 minutes after the receiver is powered on. If exceeds the time, can be powered on again. 2. Batch operation can be performed within the remote control range. |
|
2 |
Press and hold the remote control “Off” for 10 seconds. The indicator of the remote control flashes quickly, means it enters the clearing code transmission status. There is no need to select the corresponding area when clearing code. |
1. Will automatically exit code transmission status after 60 seconds, or pressing any key to exit. 2. If the original remote controller is lost, the new remote controller can be used for clearing operations. |
|
3 |
See the load light flashes 3 times and return to the initial state |
Clearing coding is finished successfully |
(3)Code learning operation between remote controls: Used to unify system code values or copy a new remote controls.
Since each remote controller has its own unique code at the time of delivery, when there are multiple remote controllers in one system, one of them (for example, remote controller A) must be selected as the system code value, and the code value of the rest remote controllers (for example, remote controller B) should be copied to the same one.
|
Step |
Operation |
Instructions |
|
1 |
A remote control:Press and hold “ON” on the remote control for 5 seconds, the indicator of the remote control will flash quickly, means it enters the pairing code transmission status. |
Will automatically exit code transmission status after 60 seconds, or pressing any key to exit. |
|
2 |
B remote control: long press "mode key" for 5 seconds, the remote indicator light changes from 100% light to 5% light and flash, means entering the code value receiving state |
Will automatically exit the code value receiving state after 30 seconds, or exit after learning the code value successfully. |
|
3 |
see the B remote control indicator light flash 3 times |
Code copying is finished and exit code value receiving status. |
(4) The remote controller restores the factory setting: it means that the remote controller will be restored to the factory's unique code value.
|
Step |
Operation |
Instructions |
|
1 |
Long press "mode " for 20 seconds |
The remote indicator light dim down and flashes continuously until the 20th second and then back to 100% light. Means this step is finished. |
|
2 |
Press the "OFF" to confirm, the remote indicator light flashes 3 times |
Restore factory settings successfully. |
About installation of remote control’s bracket:
1.Accessories include: bracket 1pc, 3M foam sponge glue 1pc, screw 2pcs, expansion tube 2pc.
2. There are 2 options for bracket installation:
1) Using screw and expansion tube make drilling installation (suitable for uneven and ash surface);
2) Using 3M foam sponge glue make free drilling installation (suitable for flat no ash surface).
Product information for placing order
|
Product name |
Item number |
|
4 in 1 LED controller with RFBK remote |
HX-DLV003-RFBK |
Our Services
Customer Reviews total 0 items