Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
2.4g wireless control smart led lighting control system touch switch zigbee dimmer
AHWS933-Z-PM-6S-R-OTA-PRO is a wall mounted multi-functional ZigBee switch. It is part of ZigBee
lighting control system iLightsIn Pro, to control lights manually.
* 3.2 inch TFT display
* DPI: 320x240
* 6 key
* Scene control, dimming/ tuning control
* Power metering function
* Receiver inside for passive wireless switch pairing
* Support relay switch (3A max)
* Supports wide voltage input
* Supports humidity sensor, temperature sensor
Caution: Please cut off the main power while installing!
|
Terminal |
Description |
|
|
AC In |
L |
AC 200V-240V |
|
N |
||
|
Ac Output |
L |
AC 200V-240V |
|
N |
||
1. Initial states. When ZigBee switch is firstly powered up, there’s a notification telling “The device is in the Factory Default State, intended for initial configuration.”
2. First 30 minutes. The Zigbee switch in initial state is searchable by the ZigBee gateway in the first 30 minutes after power up.
3. Choose a gateway. Power on the ZigBee gateway, open the App “iLightsIn Pro”, select gateway from Settings/Add device.
4. Add device. Click “Search” button. Switch main menu appears after added successfully.
5. Scenario setting. “Scenario”- “Add Scenario”- select relevant device(s) and set brightness/ cct, on/off from “Preset Status”- “Save” - name the scenario- click “OK”.
6. Binding. “Setting”- “Binding Setting”- choose the switch- bind each channel with a scenario preset, max 6 scenarios. If the 6thscenario is loaded, the switch cannot be bound to a light/ light group for dimming/cct control.
7. Manual control by switch. Once the setting is done, the switch is ready for daily control of scenario loaded or dimming/cct on the bound lamps.
1. Soft reset: Delete the ZigBee switch on the “iLightsIn Pro” App when it’s powered on. “Setting” - “Edit Device” – choose the switch and delete.
2. Hard reset: press “Factory Reset” from setting on the switch.
3. If reset is successful, the screen shows “The device is in the Factory Default State, intended for initial configuration” again. And all settings are initialized.
|
Parameters |
AHWS933-Z-PM-6S-R-OTA-PRO |
|
Input power |
200-240VAC |
|
Wireless frequency |
2.4GHz/ 50/60HZ |
|
Relay max exchange current |
3A Max |
|
Standby PF |
0.33 |
|
Standby power |
1.37W |
|
Operation temperature |
-40°C to 85°C |
|
Transmission range |
30M |
Size: 86mmx86mmx35mm
Weight: 140g/ pc
Package:1pc/ package
iLightsIn Pro Product List:
| Gateway | HGW928 | 30M ZigBee-Ethernet gateway |
| HGW928-Z-BEAC | 100M ZigBee-Ethernet gateway | |
| ZigBee Controller | AHLC610-Z | IP20 3A 1-10V dimming controller |
| AHLC734-Z | IP65 3A 1-10V dimming controller with power metering (round) | |
| AHLC912-Z | IP65 3A 1-10V dimming controller with power metering (rectangle) | |
| AHLC916-Z | 3A 1-10V dimming linear controller with power metering | |
| AHLC833-Z-BEA | 100M IP65 10A 1-10V dimming controller with power metering | |
| AHLC833-Z-IA/EA | IP65 10A 1-10V dimming controller with power metering | |
| AHLC833-Z-PM | IP65 power metering controller (no relay) | |
| AHLC909-Z | IP20 1/ 2/ 3 channel 0-10V dimming controller | |
| AHLC614-Z | IP20 3A*3 3-channel on/off controller | |
| AHLC721-Z | IP20 1.5A trailing edge triac dimming controller | |
| AHLC502-Z | IP20 DC 12V/ 24V/ 48V dimming/ CCT/ RGB/ RGBW/ RGBCW controller | |
| AHLC718-Z | IP20 electric up/ down curtain controller | |
| AHLC922-Z | IP65 12VDC input ZigBee dimmer | |
| ZigBee Driver | AHLD503-Z | 24-42V 40W dimming/ CCT driver with/without power metering |
| AHLD719-Z | 25W dimming/ CCT driver | |
| AHLD905-Z | 25W dimming/ CCT driver (round) | |
| AHLD728-Z | 15W RGB/ RGBW/ RGBCW driver | |
| AHLD812-Z | 13W dimming/ CCT driver | |
| AHLD925-Z | 48-220V 75W efficiency max 92% dimming linear driver with power metering | |
| AHLD816-Z | 24-42V 80W efficiency max 85% dimming/ CCT linear driver with power metering | |
| AHLD817-Z | 24-42V 40W dimming/ CCT linear driver with power metering | |
| AHLD827-Z | 150W dimming driver with power metering (rectangle) | |
| AHLD828-Z | 150W dimming driver unit with power metering (round) | |
| ZigBee Switch | AHWS933-Z | Multi-function switch |
| AHRC811-Z | 4-channel dimming/ CCT remote control | |
| ZigBee Sensor | AHDS826-Z | Standalone IP65 dimming daylight sensor |
| AHCS901-Z | Standalone IP65 CCT daylight sensor | |
| AHMS823-Z | Standalone IP65 3-15M motion sensor with/without heatmap function | |
| AHPS902-Z | Standalone IP20 7M PIR motion sensor with/without heatmap function | |
| AHMS810 | IP65 wired 3-15M motion sensor | |
| AHMS808 | IP20 wired 1.6-8M motion sensor | |
| ZigBee Emergency | AHEC920-Z | IP20 emergency converter for panel with battery |
| AHEC921-Z | IP20 emergency converter for bulkhead/ exit box with battery | |
| AHZM918-Z | ZigBee module for emergency converter | |
| ZigBee Bridge | AHBG806 | 1-10V/ RS232/ Dali/ Dry contract/ L/N detect bridge |
| AHBG813-Z | bridge with audio input |
Customer Reviews total 0 items