2-Wire Combined Smoke and Heat Detector with Relay Output Function

Specification for Heat Detector with Relay Output Function

1.Addressable heat detector is a mated product of the 9000 series fire alarm control panels.It uses a two-bus work mode. With an internal microprocessor, it supports electronic coding.

2.The detector realizes real-time acquisition of the in situ smoke concentration data .And sends back the data to a fire alarm control panel.

3.It can also receive and execute the control commands given by a fire alarm control panel.

Heat Detector with Relay Output Function Technical Parameters

1.Executive standard: GB4716-2005
2.Operating voltage: 24V (pulse modulation)
3.Operating current: <300uA (monitoring status) or <1.5mA (alarm status)
4.Product class: A2
5.Wiring method: non-polarity two-bus system (L1, L2)
6.Coding mode: It can realize electronic coding via coder in situ. Address codes 1 to 324 are available for selection.

7.Operating environment: Indoor, temperature: -10°C~+50°C; relative humidity: ≤95% (40°C±2°C, without condensation)
8.Protection area: about 60m2. For details, see related provisions in GB50116-98 Code for Design of Automatic Fire Alarm System.

9.Work indication: The red indicator will blink in the monitoring status or remain lit in the alarm status.

  Heat Detector with Relay Output Function Features and Benefits

Heat Detector with Relay Output Function  

 Heat Detector with Relay Output Function

Heat Detector with Relay Output Function