Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Type: |
Array |
China
Long Term
2019-10-17 01:19
Scan By Phone
Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Type: |
Array |
45W Emergency light inverter led conversion kit for led panel 1 hours emergency working
For example as following ;
Specifications
Product Code | EME-LD20 |
---|---|
Description | 20W LED EMERGENCY PACK |
Watts | 20W |
Battery duration | 3 hours |
Charging Time | 24 Hours |
Battery Sealed | 9.6V/1.7Ah |
Ambient Temp | +10C to +50C |
Rated Supply | 110/220V,50-60Hz |
Emergency Kit for External Driver LED Products
1.Model: EME-**
2.Instruction manual
Product name: Emergency lighting module for LED downlight,LED Panel,LED Ceiling light ect...
3.Product highlights
1. According to EN60598; EN 55015; CE;
2. Deep discharge protection
3. Operation time (discharge):1-3hours(Customized within 3hrs)
4.Specification
Voltage: AC 220-240 V 50-60Hz
Self consume power: <5W
Batterycharging: 24hours
Discharge current: 70mA
Suitable light source: LED downlight
Batteryspecification: Ni-Cd9.6V 1700MAh HT (High temperature)
Environment temperature: -10…+55℃
Highest surface temperature: 70℃
LED charge monitoring
Batteryprotection device equipped
Test switch: switch between emergency and normal lighting function, should have normally open switch
Applied LED downlight range:10-50W
5.Installing size (mm)
7. APPLICATION GUIDE
7.1.Install the unit according to wiring diagram, any improper wiring may lead to permanent damage to the unit;
7.2.Normal AC mains supply, the inverter allows the battery pack charging,trickle charge to maintain battery
performance.Sudden interruption of the mains AC,then the inverter converts DC battery powered to ensure that
lighting and security;
7.3.Inverter with multiple protection functions:charge protection,discharge protection, short circuit protection;
7.4.To ensure maximum performance of the built-in battery, please fully charge the unit for 24hours after first
installation;To extend battery life,please make sure charge the battery at least one time every three months;
7.5.Don’t install top of the high temperature objects.Please ensure that the operating ambient temperature is below
50ºC, and maximum case temperature (tc) not exceeding 70ºC;
7.6.Do not operate this unit beyond the operating supply range;
7.7. In normal use, the battery can be done 500 charge/discharge cycles
7.8.If experience any problem during use,please contact with supplier for help.
For product pricing, customiztion, or other inquiries
Contact Supplier
Customer Reviews total 0 items