1. The lamp socket must be hung up so that the bulb can only face down.

2. Bulbs that maintain flammable substances. Do not allow light bulbs or sockets to contact walls, ceilings, fabrics and curtains, curtains or other materials. The bulb should be suspended freely in the direction downward from the nearest object at least 3 feet.

3. Do not cluster bulbs.

4. It does not apply to ceiling, ceiling, cabinets or other enclosed spaces.

5. Not to illuminate the aquarium.

6. Unsafe buildings or other structural supports use nails, nails or other sharp edges.

Conductive materials may damage electric wires.

7. Avoid insulation damage during installation. Do not pierce or other sensible compromise lines or socket shell, jacket or sheath.

8. Regularly check the deterioration of wires and sockets due to weather, ultraviolet or other damage. Replace worn string lights in time.

9. Do not install lamp string face up!

10. Do not make any socket with maxi mum power (40 watts) and overall maxi-mum power capability any way to use or connect string set light when!

See the following figure

Wattage of bulb

Most use

Light string

11 watt incandescent bulbs 15 x 33'inch

15 watt incandescent bulbs 12 x 33'inch

25 watt incandescent bulbs 7 x 33'inch

40 watt incandescent bulbs 4 x 33'inch

The maximum load per socket is 40 watts. Do not use more than 40 watts of bulb.

Light string bag with thick plug

1. The provided light string assembly is connected to the attached polar plug, providing only a suitable polarization socket. If not, reverse plug. If not, contact a qualified electrician. Do not change plug.

2. 1600W is not connected to the maximum power of the lamp string.

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 

A: Low MOQ, 1pc for sample checking is available

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

A: Yes, we offer 2-5 years warranty to our products.

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.