Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Product Description
5m black pcb tube silicon gel waterproof ip67 led strip ws2812b flexible 60leds strip
Item No.: | TS-10060-WS2812RGBW | ||||||
LED TYPE | SMD 5050 RGBW chip | ||||||
Available color | RGBW | ||||||
IC Model | ws2812/SK6812 | ||||||
Color | Addressable full color | ||||||
View angle | 120 degree | ||||||
LED QTY | 60led/m | ||||||
POWER | 19.2W/M | ||||||
Voltage | DC5V | ||||||
PCB color | white /black | ||||||
PCB width | 10mm | ||||||
Installation | wiht 3M adhesive back ,easy for installation | ||||||
IP rate | IP20/IP65(Silicon tube )/IP67/IP68 | ||||||
Package | 5M/ree l .with anti-static bag | ||||||
Application | indoor /outdoor decorative lighting ,ceiling lighting ,sign lighting etc | ||||||
Detail use information:.
1)Addressable full color led strips---WS2811 IC/UCS1903 IC
2)60pcs led per one meter
3) individually control ----------1 ic& 3led chip
4)Standard Reel Length: 5meter/roll, also can be customized.
5) Cutted: 3 integrated RGB LEDs per segment, can be cutted per 3LED.
you can cut this stuff pretty easily with wire cutters, there are cut-lines
every 0.65''/3.33cm(1 LED each), Solder to the 0.1'' copper pads and you're good to go.
6)Power supply: You must use a 12 DC power supply to power this strip, do not use higher than 12V or you can destroy the entire
strip
7)3PIN JST SM connector(non-waterproof)soldered in each end of strip,extra 2single wire for powering in input side
8)Customised length available
2)60pcs led per one meter
3) individually control ----------1 ic& 3led chip
4)Standard Reel Length: 5meter/roll, also can be customized.
5) Cutted: 3 integrated RGB LEDs per segment, can be cutted per 3LED.
you can cut this stuff pretty easily with wire cutters, there are cut-lines
every 0.65''/3.33cm(1 LED each), Solder to the 0.1'' copper pads and you're good to go.
6)Power supply: You must use a 12 DC power supply to power this strip, do not use higher than 12V or you can destroy the entire
strip
7)3PIN JST SM connector(non-waterproof)soldered in each end of strip,extra 2single wire for powering in input side
8)Customised length available
Connection:
SPI signal :LED strip+ LED power supply +led controller DMX control :LED strip + LED power supply+DMX controller +DMX decoder
LED controller :T-series SD card controller ,RF remote controller .DMX controller,Arduino.........(off line /PC online)
LED power supply :Meanwell power supply ,T- series ,A-series .... (waterproof /non-waterproof )
LED controller :T-series SD card controller ,RF remote controller .DMX controller,Arduino.........(off line /PC online)
LED power supply :Meanwell power supply ,T- series ,A-series .... (waterproof /non-waterproof )
Customer Reviews total 0 items