Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
ZigBee 3.0 RGB+CCT 4W GU10 LED Spotlight Pro
Specification
Create personalized experience with colorful smart light
Transform your home with over 16 million colors, instantly creating the right atmosphere for any event.
Choose from preset light recipes
With a touch of a button, you can set a festive mood for a party, turn your living room into a movie theater, enhance your home decor with color accents and much more.
Set the right mood with soft white light
Dimmable from bright daylight to low nightlights, this smart light allows you to fill your home with just the right level of light when you need it.
LED bulb technology
Designed to provide longer, more energy-efficient illumination.
Unlock full set of smart light features with Zigbee 3.0 bridge
Add a zigbee 3.0 bridge to your smart lights to experience the full set of smart home light features. With a bridge, you can add up to 50 smart lights to control throughout your home.
Create timers and routines to automate your entire smart home lighting setup, use your lights to wake up and go to sleep. Control your lights while away from home, or add accessories, such as motion sensors and smart switches.
Control lights with your voice
Get hands-free control of your lights and use your voice instead! Simple voice commands allow you to control multiple lights in a room or just a single lamp.*
Easy 2-step installation
Just insert and screw in your Gledopto bulb, and download the zigbee app to connect directly to your new bulb.
* Works with Alexa when used with a compatible Echo device.
Control it your way
Connect your Gledopto lights with the Bridge and start discovering the endless possibilities. Pair it for home automation with your existing H-u-e products or SmartThings system.
Requires a Zigbee 3.0 or Zigbee Tuya Hub/Bridge/Gateway
Connect your Gledopto lights with the Hub/Bridge/Gateway to control your lights from your smartphone or tablet via the zigbee smart app.
Transform your home with over 16 million colors, instantly creating the right atmosphere for any event.
Choose from preset light recipes
With a touch of a button, you can set a festive mood for a party, turn your living room into a movie theater, enhance your home decor with color accents and much more.
Set the right mood with soft white light
Dimmable from bright daylight to low nightlights, this smart light allows you to fill your home with just the right level of light when you need it.
LED bulb technology
Designed to provide longer, more energy-efficient illumination.
Unlock full set of smart light features with Zigbee 3.0 bridge
Add a zigbee 3.0 bridge to your smart lights to experience the full set of smart home light features. With a bridge, you can add up to 50 smart lights to control throughout your home.
Create timers and routines to automate your entire smart home lighting setup, use your lights to wake up and go to sleep. Control your lights while away from home, or add accessories, such as motion sensors and smart switches.
Control lights with your voice
Get hands-free control of your lights and use your voice instead! Simple voice commands allow you to control multiple lights in a room or just a single lamp.*
Easy 2-step installation
Just insert and screw in your Gledopto bulb, and download the zigbee app to connect directly to your new bulb.
* Works with Alexa when used with a compatible Echo device.
Control it your way
Connect your Gledopto lights with the Bridge and start discovering the endless possibilities. Pair it for home automation with your existing H-u-e products or SmartThings system.
Requires a Zigbee 3.0 or Zigbee Tuya Hub/Bridge/Gateway
Connect your Gledopto lights with the Hub/Bridge/Gateway to control your lights from your smartphone or tablet via the zigbee smart app.
Product Description
Lighting Features of RGB+CCT 4W ZigBee3.0 Protocol LED Spot Light[GU10 Spot], Works with Alexa Echo Plus, SmartThings, Homee, Smart Friends, Zigbee2MQTT, ConBee II and Google Assistant
1. Switch between multiple lighting modes at will.
2. Rich lamplight atmosphere, give you more pure and fresh sense, available in Timmer & night light mode option.
3. Brightness and color temperature dimmable/adjustable from warm white 2000K to cool/cold white 6500K.
4. Customize your colorful life, 16 million color saturation changes, make life full of beauty.
5. Home or Away lighting mode, to remote control the smart LED bulb even away from home, to ensure the saftety of your home.
2. Rich lamplight atmosphere, give you more pure and fresh sense, available in Timmer & night light mode option.
3. Brightness and color temperature dimmable/adjustable from warm white 2000K to cool/cold white 6500K.
4. Customize your colorful life, 16 million color saturation changes, make life full of beauty.
5. Home or Away lighting mode, to remote control the smart LED bulb even away from home, to ensure the saftety of your home.
ZigBee 3.0 Lighting Control Features
Gledopto Zigbee LED Lamp and Controller directly work with H-u-e, Amazon Echo Plus, Smartthings, O-s-r-a-m L-i-g-h-t-i-f-y, Homee, ConBee II, Google home & all other alexa devices. Apps work with H-u-e gateway: H-u-e, h-u-e-party, h-u-e Disco, iConnectH-u-e, H-u-e Widget, Light DJ, etc. Work with Home assistant & Homekit. Please visit Reddit and search for GLEDOPTO for more detailed introduction of how to link to different ZigBee 3.0 gateways and hubs.
Housing Material
1. High Quality E-pistar LED Chip, low heat dissipation, high brightness, durable and long lifespan up to 50,000 hours.
2. Adopt high-grade PC Cover, 93% lighting transmittance, uniform light distribution, no dark spot, no glare
3. ZigBee 3.0 Protocol controlling technology, multi signal transmitted at the same time, lonng smart remote control distance, anti interference feature.
4. AC100-240V universal input design; Constant Current output to provide stable voltage & Curent to Light source.
5. Full Aluminum housing material, low heat emittion, no welding process to ensure the product quality.
2. Adopt high-grade PC Cover, 93% lighting transmittance, uniform light distribution, no dark spot, no glare
3. ZigBee 3.0 Protocol controlling technology, multi signal transmitted at the same time, lonng smart remote control distance, anti interference feature.
4. AC100-240V universal input design; Constant Current output to provide stable voltage & Curent to Light source.
5. Full Aluminum housing material, low heat emittion, no welding process to ensure the product quality.
Sync Effect with screenbloom
Sync your lights with movies, music, and games, Enjoy the lighting effect which synchronizes with the plot of the picture immediately, and experience the more delicate atmosphere lighting effect.
Application: Floor lamp, Beside lamp, Kitchen lamp, Table lamp, Wall lamp, Study lamp and etc.
How to link & use with Remote Control
1. Within 3 seconds after power on, click the "on" button of the group to conduct code matching, and the LED light turns green, indicating successful code matching.
2. Long press the "off" button of the remote control to enter the night light mode, and the brightness and color can still be adjusted at this time.
3. Long press the small moon key to enter the 60 seconds delay shutdown state.
4. Long press M key to enter automatic mode.
3. Long press the small moon key to enter the 60 seconds delay shutdown state.
4. Long press M key to enter automatic mode.
How to unlink
1. If the LED is still connected to the ZigBee gateway, long press the "on" button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current color.
2. If the LED is not connected in the ZigBee gateway state, long press the "on" button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times.
1. Master ON( I )/OFF(O)
Acts as a master ON( I )/Off(O) control for all zone-linked RGB+CCT/RGBW lights. Also activates the “Master” function, which allows the remote to control the RGBW lights of all zones. If a zone is currently active, pressing the master On(-) button restores the “Master” function to the remote.
2. Color Selection Ring
Directly selects color along a circular spectrum. To obtain white light only, keep the “Zone On” (|) button depressed until the light changes to a steady bright white.
3. Selection LED Indicator
Flashes once to indicate when a command has been selected.
4. Brightness Touch Slider - Increase(Right Side)/Decrease(Left Side)
Increases(right side) or decreases(left side) the brightness level. Changing the active mode resets the brightness level to full.
5. Mode Start/Scroll(M)
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes. This button initiates the Mode function and scrolls through the modes in ascending order.
6. Mode Speed - Increase(S+)/Decrease(S-)
Increases (S+)/decreases(S-) the tempo of the mode pattern currently active.
7. Zone On(|)/Off(O) - Zones 1-6
Allows up to Six “zones” (i.e. channels) of RGB+CCT lights to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked. Steadily depressing the Zone ON( | ) button restores the lights in that zone to white.
Note: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions, such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m).
Acts as a master ON( I )/Off(O) control for all zone-linked RGB+CCT/RGBW lights. Also activates the “Master” function, which allows the remote to control the RGBW lights of all zones. If a zone is currently active, pressing the master On(-) button restores the “Master” function to the remote.
2. Color Selection Ring
Directly selects color along a circular spectrum. To obtain white light only, keep the “Zone On” (|) button depressed until the light changes to a steady bright white.
3. Selection LED Indicator
Flashes once to indicate when a command has been selected.
4. Brightness Touch Slider - Increase(Right Side)/Decrease(Left Side)
Increases(right side) or decreases(left side) the brightness level. Changing the active mode resets the brightness level to full.
5. Mode Start/Scroll(M)
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes. This button initiates the Mode function and scrolls through the modes in ascending order.
6. Mode Speed - Increase(S+)/Decrease(S-)
Increases (S+)/decreases(S-) the tempo of the mode pattern currently active.
7. Zone On(|)/Off(O) - Zones 1-6
Allows up to Six “zones” (i.e. channels) of RGB+CCT lights to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked. Steadily depressing the Zone ON( | ) button restores the lights in that zone to white.
Note: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions, such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m).
Lighting Application
Certifications
Company Information
FAQs
Q1. What is the beam angle of the lights?
A: The beam angle is 25 degrees.
Q2. I have nine ordinary gu10 spotlights in my kitchen, can I just replace 3 of them to these bulbs or must I do them all?
A: Yes you can replace part of them, but then you’d only be able to control those three with the app/Alexa
Q3. Can I change each lights color individually?
A: Yes, you can control Gledopto led light lamps by Gledopto 2.4G RF remotes, smart wall switches and zigbee smart app at the same time.
Q4. Are these lights dimmable?
A: Yes, thes Gledopto lamps can be set to various levels through app. And any of 16 million colors at any brightness you want.
Q5. Is this multi voltage?
A: Range 100 V - 240 V, 50-60 Hz
Q6: Will I be able to change colors via app, or do I need to have the hub to do that? Some say you need a h-u-e hub and others say you need a h-u-e bridge. Are these the same thing?
You will need a Hub and once you have that an the app, you can change colors and set up lighting routines including times ones. Previous versions of the product used the name “bridge”. More recent versions use the name “hub”.
Q7: Can these lamps illuminate in green?
A: Yes they can and also illuminate at different percentage of power levels
Customer Reviews total 0 items