30cm 60cm 90cm 120cm 150cm T8 led tube light G13 pins electronic ballast compatible type A 130lm/w 5 years warranty

https://wiscoon.en.alibaba.com

LED SENSOR TUBE LIGHT SPEC
LED SENSOR TUBE LIGHT
FEATURES:
·PIR or Radar sensor available
·2ft,3ft,4ft,5ft with 0W-25W power optional
·Off: 0-100% brightness adjustable, On: 100% brightness
·Detection distance:5-9M, delay time:10s-90s
·Detection angle: 90-120deg(PIR) or 0-180deg(Radar)
·Instant start without flicker
·No UV, IR and No mercury &lead
·PF>0.95,CRI>70Ra
·CE,ROHS standards
·Long lifespan up to 50,000hours
APPLICATIONS:
Lighting for parking lot, hospital, Schools, corridor etc.
WISCOON TECH CO LTD FOR YOUR HIGHER SATISFACTION
LED SENSOR TUBE LIGHT SPEC
SPECIFICATIONS:
Input voltage 85-265V/AC(50-60Hz)
Power(100%) 2ft/(10W), 4ft/(18W), 5ft(22W)
LEDs initial efficiency 1300lm/10W, 2340lm/18W, 2860lm/22W
Fixture brightness 900lm/10W, 1800lm/18W, 2100lm/22W
Color Temperature Warm white, Neutral white, Pure white
CRI 70Ra
Detection distance 5-8M
Detection angle 90-120deg(PIR), 0-180deg(Radar)
Delay lighting time 10s-90s
Power factor/Efficiency 0.95/0.88
Beam angle 120deg
LED junction temperature <65 ℃ at Ta=30 ℃
Operating Temperature -20~+45 Degrees Celsius
Storage Temperature -30~+65Degrees Celsius
Materials 6063 high purity aluminum heatsink
Lifespan 50,000hours
Quality standards CE,ROHS
IP grade IP44
Lamp size(With PINs) L603mm/1213mm/1513mm*D26mm
Packing(25units/CTN) 1260*220*230(mm), 1560*220*230(mm)
Sensor-feature details:
On(100%) Off(0-30% typical)
WISCOON TECH CO LTD FOR YOUR HIGHER SATISFACTION
LED SENSOR TUBE LIGHT SPEC
1, PIR sensor:
Detection distance: 5-8M
Detection angle: 90-120deg
Sensor lighting time:10-90s
Sleep power:0,10% or as requirement
Based on human body temperature
2, Radar sensor:
Detection distance: 5-8M
Detection angle: 0-180deg
Sensor lighting time:10-90s
Sleep power:0,10% or as requirement
Based on microwave length change in the environment
Remarks:
PIR sensor version is mostly applied in corridor, classrooms etc lighting sites, when human body
come into the area, the lamp change to work at full power, and after people leave, back to sleep
power.
While radar sensor version mostly used in parking lots, when cars or other subjects come into the
area, will change the microwave of the environment, and turn to work at full power. This is much
more sensitive than PIR sensor.
Please choose the proper sensor version before order.
Installation:
---Switch off the power before installation, and insert the PINs into the fixture, For single end input way,
check the “AC in” sticker to install in right end if, you don’t want to switch off the power.
---If the old fixture is electric ballast, Remove the ballast and starter.
---If the old fixture is inductance ballast, Remove the starter, the ballast can be kept or removed, But as suggestion.
it is better to remove the ballast because the ballast will waste power if not removed.
Wire diagrams---Suitable for electric ballast
For inductive ballast
WISCOON TECH CO LTD FOR YOUR HIGHER SATISFACTION
LED SENSOR TUBE LIGHT SPEC

led tube lights applications:

Factory images