Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Product Details
6W round slim led ceiling panel light with high quality zhongshan manufacture
Panel Light LED
1. Votalge:AC85-265V
2. SMD2835
3. LED Power: 6W
4. Shape: square round option
SMD2835 3W/6W/9W/12W/15W/18W/24W Round LED Panel Light,three years warranty with CE&ROHS
LED panel light is produced by the light-emitting diodes as a light source the production of a new commercial lighting products, its service life up to 50,000 hours or more, the size is the same to traditional fluorescent light lamp panel specifications, can be installed directly on the ceiling, It's safety regulations and electromagnetic compatibility. installation is simple and convenient.
LED panel light Technical parameters:
LED Panel Light
| ||||||
Model
| APL-PB-2401 | |||||
Watt | 3W | 6W | 9W | 12W | 15W | 18W |
Size(MM)
| Dia85*25 | Dia120*25 | Dia150*25 | Dia170*25 | Dia190*25 | Dia225*25 |
Cut out(MM) | Dia75 | Dia105 | Dia135 | Dia150 | Dia180 | Dia205 |
LED Type | SMD2835 | |||||
LED QTY | 15pcs | 30pcs | 45pcs | 60pcs | 75pcs | 90pcs |
Lumen | 210lm | 410lm | 740lm | 945lm | 1380lm | 1645lm |
Power Consumption | 3.7W | 6.7W | 10.1W | 12.9W | 15.8W | 19.2W |
CCT | 2700-3500K,4000-4500K,5700-6500K | |||||
Driver | External driver | |||||
Input Voltage | AC85-265V | |||||
Emtting Color | White, Warm White, Day White, Cool White | |||||
CRI | Ra≥75 | |||||
Working Temperature | -25~45 ceilus degree | |||||
Body Material | Aluminium+PMMA | |||||
Package | Neutral Colorful Inner Boxes + Brown Carton | |||||
Installation | Recessed | |||||
Certificates | CE RoHS |
3w led panel light test:
PACKAGE:
APPLICATIONS:
- Hospital,Phamaceutical factory
- Conference / Meeting rooms
- Factories & Offices
- Commercial Purposes
- Residential / Institution Buildings
- Schools, Colleges & Universities
- Hospitals
- Other Lighting
LED Panel Light Features:
Green llumination: There is no harmful metals such as mercury, lead and so on, no flicker and fast start in working, No produce ultraviolet light when luminescence, No attract mosquitoes, No damaged for frequent switching.
Safe, Efficient: Adopt wide voltage and wide frequency constant-current topology isolation circuit design for power supply, small size, with low noise, low temperature, high efficiency, high power factor, energy saving, environmental protection, security, long lifespan. there is protection in open circuit, short circuit, overload and lighting surge. light guide plate and diffuser plate are adopted japan mitsubishi PC diffuser, light transmittance is above 82%, Emitting surface is bigger than 92%, the light is soft and without glare.
Excellent heat: Ultrathin gear-shaped exterior design, aluminum die casting forming shell surface of the electrostatic spraying, This design of effective use of the lamp body contours and surface Process, effectively increasing the cooling area to improve the thermal conductivity of the shell surface of the LED surface temperature lower, more stable performance and longer life.
Long lifespan: Introduce the advanced thermal management technology of LED from Japan. The light decay of Josun products is very low and the lifespan is above 50,000 hours.
Manufactory Profile:
INSTALLATION:
1. First need to install skeleton on the location of the LED panel lights,This skeleton size must be matched with the panel lights and the skeleton loading capacity to achieve more than 3KG,Otherwise the installation will be not loaded into or It's too loose, easy to fall off rather than security;
2. Connect the power supply wires to panel lights power on the install position of the panel lights;
3. Connect the DC output female connector of power to the DC input male connector of panel light,Attention must be inserted in the end;
4. after installed as the position, should be clear around 50mm around the power and outside the light
Notices :
1. The size of lifting skeleton must be consistent with the product, otherwise it wouldn't be installed or too loose to secure.
2. The skeleton of lights installed must use the traction line lifting and loading capacity must be more than 5KG.
3. The wire must be passed 3C certification of two core cable, To reduce the risk of fire hazard.
4. Wire copper is not exposed outside of the power terminal holes,To avoid a short circuit or get electrocuted.
5. Put the driver in the safe and reasonable position to be to facilitate the replacement or maintenance, After panel lights installed into the loaded position, To forbid having other stuff 50mm around panel light shell.
6. Installation should pay attention to disconnect the input gates, to prevent electric shock.
7. Non-professionals not allow to open the power box, and maintenance.
We are professional Zhongshan LED light factory, specialized in LED flood light, LED Tube, LED Panel light, LED Down light and Spot light.
With reliable quality and competitive price, we won a group of loyal client both domestic trading company and overseas.
Our direct sell must bring you more benefit, look forward to cooperate with you!
Contact :Suzy
Email :gzb at liyinled.com
QQ:3061459255
What's App : +86 13169308819
Customer Reviews total 0 items