RV Cams Backup Camera System

Car rear view system,Agricultural Parts,car rearview system,car reversing camera system,rear view system,

reversing camera system,Backup Camera System,Rera viewe camera kit.

7" Digital Screen TFT LCD Color Monitor with Removable Sun Visor

OSD MENU Separately Set Each Camera Trigger Priority

OSD MENU Separately Set Each Camera Reversing Image Delay Time 0-30"

OSD MENU Separately Set Each Camera Mirror/Normal image

Manual and Automatic Switch Display Mode

Color System:PAL/NTSC (AUTO)

Display Resolution: 2400(H) X 480(V) dot

Support Three Camera Video Inputs:1.0Vp-p75Ω

Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65

Brightness (cd/m2): 400

 Contrast ratio: 500:1

Back-light:Single LED

Operating temperature: -20°C to +70°C

Storage temperature: -30°C to +80°C

Free Operating Voltage DC8-32V

External dimensions:L*W*T(180X118X38)mm(without mounting)

Weight Approx: 379g

IP 67 water pressure

P=ρgh ,Water depth: about 60cm,(Equivalent to IP67 water pressure) P=1000kg/m3*10g*0.6m

P=6KPa,So IP67"s pressure is less than 100KPa, It doesn’t meed high pressure waterproof

test’s standard.

IP 69K water pressure

P=ρgh,waterproof test pressure:100KPa,(Equivalent to IP69 water pressure)

100000=1000kg/m3*10g*H,H=100000/1000/10=10m

Image Type:1/3 SHARP CCD

Horizontal Resolution:420TV Lines

Effective pixel:NTSC:720(H)×480(V); PAL:720(H)×586(V)

Usable Illumination : 0Lux ( Built in IR LED"s for Picture Support in the Dark)

Free viewing angle: 130°

Waterproof: IP69K

Shockproof: 10G

Video Output:1.0Vp-p75Ω

Power supply:DC12V from Reversing Monitor

RV Cams Backup Camera System:

1. Reversing Camera Monitor System for Moter Home,RV,Heavy Equipment Cleaning Vehicles,Fire

    Department Vehicles Trucks,Bus

2. 7 inches Digital Screen TFT Monitor OSD MENU Separately Set Each Camera

    Mirror/Normal image,Reversing Image Delay,Priority of Reverse Camera and Support

    Three Camera Video Inputs.

3. Three Sets High Performance Color CMOS Camera Built in IR LED"s Water resistance:IP69K

4. Load dump test:

Load dump means the disconnection of a powered load. It can cause  failure of supply to equipment or

customers,large voltage spikes from the inductive generator. In automotive electronics, it refers to

the disconnection of the vehicle battery from the alternator while the battery is being charged. Our

monitor can endure the  peak voltage of this surge : DC13.8V+87V,  takes up to 400 ms .