What is the Advantage of our New LED Flood Light?

1. Structure: New four-in-one Structure Deisgn with surficient hent sink.

2. Reflector: Built-in reflector, 20 &80 degrees available now, more will be coming soon.

3. Driver: Mean Well round HBG series driver.

4. LED: Citizen COB.

NEW High Power Outdoor 800W 1000W 1200W led flood light  

       1.Packing:standard master cartoon or packing as customer's requirement for new led flood lights

       2.Dilivery Time:2-3 working days for samples, 6-15 workdays for bulk order

 Shipping options:

       1.By express:such as DHL,UPS,TNT,FEDEX ect

       2.Airfreight:when you order more than 100KG which will be more economical than express

       3.Seafreight:shipping by sea is available after customer provide destination port

       4.Agent designated by client:please tell us the contact details of your shipping ugent/forwards

 LED Flood Light Picture and Application

 LED Flood Light Certificate

Flood Light and Traditional light energy-saving comparison

 1.    Why should I use LED Lights?

          LED Lights consume 80-90% less energy when compared to the equivalent incandescent light bulb.

 2.    How much will I save using LED Lights?

       See the chart below for a comparison to incandescent bulbs.

3.    What is the life of an LED Light?

        If an 8w LED light is used to replace a 60w traditional incandescent bulb, and the bulb is operated 8 hours per day for one year (2,920 hours), then the electrical consumption will be reduced by 152 kw-hrs per year. The home owner will therefore save $27.36 per bulb per year assuming a fully loaded electrical bill cost of $0.18/kw-hr. If the average home has 20 light bulbs, then a savings of over $500 per year can be realized. Use the Energy Savings Calculator to estimate savings for your specific situation.

 4.    LED Lights are expensive,do I really save?

        LED lights have a theoretical useful life of over 50,000 hours compared to a useful life of 1,000 hours for a traditional incandescent bulb. Some will continue to operate up to 100,000 hours. The useful life of a bulb is the point at which the light output of the bulb has decayed to 70% of its original light output. This means that a single LED light will theoretically last over 17 years if operated 8 hours per day. [Note that the industry standard is to state incandescent bulb life at the time of 50% light depreciation level.

5.    What are the enviromental bebefits?

        The Energy Independence Act of 2007 requires that lighting efficiency be improved 28% compared to the incandescent standard of 2007 and be phased in during 2012. Therefore a 100w incandescent bulb will need to provide the same light output but operate at 72w. LED Lights will become the lighting technology of choice due to its lighting efficiency, long life, and lowest cost of ownership benefits. California already has legislation to ban incandescent bulbs by 2012. Canada will discontinue the sale of incandescent bulbs in 2012, Australia in 2010, and Europe will be phasing out in 2010 as well.

     22% of the electrical consumption in the USA is used on lighting.A substantial amount of energy can therefore be saved by converting to LED lights. Since the primary source of energy in the USA is the burning of fossil fuel and thus generation of CO2, the environment will benefit from a reduction in the amount of CO2 emitted for every kilowatt of energy saved. Every mW-hr of electricity saved will reduce CO2 emissions by 1 ton. Excessive CO2 emissions are a key reason for the partial destruction of the earth’s ozone layer and onset of global warming. Landfills will also benefit from the implementation of LED lighting due to the long useful life of the LED lights. One LED light can last has long as 50 conventional incandescent light bulbs. This is a true savings of waste.

6.Are LED Lights dimmable?

 Yes, some bulbs are dimmable. The majority of LED bulbs are not dimmable. LED components operate on DC current typically at 350 mA. Therefore every LED bulb contains a LED driver to convert the AC power to DC power. Special drivers are required if the bulb is to function with a standard voltage regulating wall dimmer such as those made by Lutron and Leviton. Therefore only install bulbs labeled as “Dimmable” in lighting circuits that contain dimmers. Topband brand dimmable LED’s are compatible with the standard Lutron P600 dimmer. If a non-dimmable bulb is installed into a dimmable circuit, the bulb may burnout, flicker, or dammage the dimmer. LED USA is not responsible for mis-use of LED bulbs and specifically is not responsible for non-dimmable bulbs operated with a dimmer.

7.What is the color of light LED’S emit?

 White light LED’s can be manufactured in a range of white colors. White light is measured on the color temperature scale in degrees Kelvin. White LED’s are typically grouped into 3 categories:

 A. Warm White: Typically 2700-3500 K. This most closely matches the  color of incandescent light and is the color of white light most used in the home to create a warm atmosphere. It has an underlying tone  of yellow/orange.

 B. Natural White: Typically 4000-5000 K. This color of light is brighter white and does not have a yellow component feeling. Natural white light is typically used for office, retail, basement, or workshop lighting environments. A traditional fluorescent tube light normally emits light in this range. Also metal halide lamps normally are within this range.

 C. Cool White: Typically 6000-8000K. This color of white light tends to have a bluish tone. Lights in this category are typically used in manufacturing and high brightness.