Addressable rgbw rgb led pixel strip light WS 2811, 2812 2813 led strip RGB, 5050 addressable rgb led strip light

SMD5050 flexible led strip lights are widely used for both indoor and outdoor, both commercial and domestic linear lighting. Different versions of SMD5050 are available: 30LEDs/M, 48LEDs/M, 60LEDs/M, 96LEDs/M, 120LEDs/M, etc. SMD5050 flexible led strip lights with CRI over 80 and high density of LEDs with more brightness are needed greatly by commercial lighting applications.

LEDs, as the lightsource of LED strip lights, are strictly selected according to the above parameters.
We only use LEDs made up of pure gold wire and pure copper bracket which provide good heat sink, low luminous flux decay and longer lifespan.

Flexible PCB: FPC is made up of 2Oz, 3Oz or 4Oz thick double-layer oxygen-free copper flexible PCB, excellent for electrical conductivity and heat-sink.

1.Original 3M double-sided adhesive tape high strength, permanent bonding and thermal conductive, 9495LE/300LSE, GTM720, GTM725, 55280 and VHB 5952, etc available.

2.Quality silicone tube and silione gel are used for waterproof craft, ensuring high transparency and no yellow with age.

3.Original RALEC lead-free and halogen-free thick film chip resistor with F(±1%) or F(±5%) with precise control of electrical current to protect optoelectronic components.

Provide a variety of color options so that you can find what you need more quickly.

Color Rendering Index
Color rendering index (CRI) of lighting sources is a quantitative measure of its ability to reproduce the colors of various objects faithfully in comparison with an ideal or natural light source. High CRI is important because high CRI lighting sources can reproduce the colors of various objects faithfully in comparison to a natural light source such as the sun. For example, Art galleries and clothing stores require high CRI lights to show the real colors of objects naturally and vividly. Therefore, we produce high CRI such as 80Ra, 90Ra, 95Ra LED strip lights.

Color Temperature Tolerance
Color temperature tolerance by MacAdam 5 step and 3 step are available. Normally the tolerance is ±100K by MacAdam 5 step and ±50K by MacAdam 3 step.We only use the same bin for each color temperature range under the precise test by integrating sphere, which ensures the same lighting color for different deliery batches without chromatic aberration.

IP20: Non-waterproof for indoor use.
IP65: Silicone gel coating, preventing multi-directional and low-pressure water jets for damp and moist areas use.
IP67: Silicone hollow tube covered, protected from water immersion between 5.9 inches and 39.37 inches within 30 minutes for indoor and outdoor use.
IP68: Silicone tube + silicone glue filling, is suitable for continuous immersion in water under conditions for indoor, outdoor and underwater use.

Our company is a professional Chinese manufacturer of LED products, with 10 years' experience in LED industry. Our main products are LED strip lights, and all of our LED strip lights are approved with CE, RoHS and UL certificates. SMD3528, SMD5050, SMD2835, SMD3014 and SMD5730 are the top-selling products.

INLUX provides one-stop service including LED strip lights, LED power supply/drivers, LED controllers, LED connectors and aluminum profiles, which meets all of your requirements and saves shopping time and communication cost.

Please contact us and we'll make the best plan for you!

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 3 years warranty to our products.

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products,
we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.