Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Type： |
Array |
Product Details
Product Description
Using Range of Rotating Beacon
This handbook describes apron rotation beacons manufactured to FAA AC 150 / 5345-12 and ICAO Annex 14 and Airport Design Manual. Please strictly follow the FAA and ICAO and other relevant provisions of the norms of the use of the lamp.
2.0 Application Environment
Altitude below 2500 meters;
Outdoor: -40 ℃ - +55 ℃;
Relative humidity: 95%; (+ 24.5 ℃), the maximum humidity can be greater than 100%;
Rain, snow, ice, water;
corrosive salt spray.
2.1 Technical Characteristics
Light intensity, light color meet the requirements.
Sophisticated optical control, light utilization, high brightness, outstanding optical performance.
Lamps shape is handsome, good thermal performance, well-designed.
The lamp uses a split structure, reducing impurities and moisture into the lamp, improving the service life of lamp optics, reducing the number of maintenance operations.
The main body of the lamp is made of aluminum alloy, the fastener is made of stainless steel, and the anti-corrosion performance is good.
Adopts high-precision machine tool processing, ensuring a full range of lamps quality and accuracy.
2.2 Technical Indicators
Halogen lamp3*150W
Lamp Using Life： ≥1000 hours
White,Green,Yellow Color
Lamp angle can be adjusted
12 rev / min, 36 times per minute flash
304 Steel cabinet with powder layer
Voltage: AC220V
Installation Way
1.If installed on a flat surface (such as concrete floor), the baffle with expansion screws on the concrete floor
2.If installed in uneven ground (such as land) in this case, you need to be fixed in the concrete block.
3.3 Installation Steps
1.Clean the site, install the floor leveling, to ensure that the lamp is installed after the completion of the level.
2.When open the package, check that the parts are complete and Handle lamps carefully to avoid damage.
3.Fix the lamp through the bottom plate screw and open the cover to connect the cable.
3.4 Adjust the Angle of the Lamp
Check the lamp pointer engraved clearly visible, loosen the side of the set screw, adjust the lamp elevation angle through the front and rear angle adjustment screw until the pointer points to a predetermined angle value, locking the set screw.
4.0 Lamps Maintenance
The routine maintenance recommendations provided in this section are for informational purposes only. The airport may establish its own routine maintenance guidelines based on other regulations or the maintenance experience of the airport staff themselves.
Airport lighting maintenance, please refer to "1.0 Foreword" described, by professionals.
ABOUT CDT
Hunan Chendong Technology Co.,LTD （shorted as CDT）is a professional manufacturer for Green navigational aids products, mainly for aviation obstruction lights, helipad lightings and meteorological target lamp in China . CDT got ISO 9001:2008 certification the first year when established.
As pioneer in China, our products are approved by ICAO and CAAC certificate. CDT keep acting as a solution provider for customers with specialty. And our products have been exported over 50 countries and areas all over the world.
Free Maintenance 5 years: From the 4th year to 5th year, We will provide product maintenance for free, when it’s damage by improper using or some other reason.(Note: Client should pay the freight to send product back)
Lifelong Maintenance: From the 6th year ,We would provide excellent service for customer if have any problems, but Client need pay the freight and maintenance cost.
When you use our product and have a failure, please contact with us. Don"t take it apart and repair it by yourself, Otherwise, we are not responsible for warranty.
1. Where can CDT’s lights be used for?
Widely used in various fields of the Air Force, Civil airport and obstacle free airspace, heliport, Electric Tower, Telecommunications Tower, Chimney, Ports, Wind Power Plants, Bridges and High-Rise Building.
2. CDT’s aviation obstruction light meet and exceed the performance of comparable AC/DC grid powered light.
The benefit of Choosing CDT airfield lighting include:
A, Durable, Reliable :
QC test for compliance guarantees safety on your airfield; Also will put product in Aging Room to test 24hours before delivery.
B, Fast installation and Easy Operation:
Install in minutes instead of days---will supply English Version Operation Manual. Also CDT light has GPS synchronizing function to be set of turn on and off automatically.
C, Fast delivery:
CDT has large stock and also have three working line to produce lights. As usual, after payment, we will delivery product about 2 weeks.
Cooperated with DHL, UPS, TNT, FedEx, and some special airline to point country.
3. How does CDT lights working?
CDT airfield light contains several parts that work together
A.AC aviation obstruction light have LED, Electrical output Cable and an intelligent energy management system
B.Solar Power Aviation Obstruction light have Solar Panels, batteries, LEDs and an intelligent energy management system
Customer Reviews total 0 items