Conventional Optical Standalone Smoke Detector

Product Introduction:

The detector is a photodetector that uses the most advanced optical sensing chamber.

The red LED on each detector provides a local 360° visible alarm indication.

They flash once every minute, indicating that the power is on and the detector is working.

When an alarm occurs, the red LED is on until the smoke concentration is lower than the alarm threshold.

When a fault LED on condition indicates that the detector sensitivity exceeds the listed limit, a beep will occur in the middle of the two flashing times;

When the battery is low, the red LED will flash and will beep.

There"s a test button to be used to test whether the detector works normally;

Each time the buzzer is pressed, the buzzer emits a beep, red LED flashes, and simulates a fire alarm;

This button can be used for local mute during a fire;

Technical Specification:

1.OEM ODM can be provided .

2.Technical support like how to install operate .Any question will be answer within 24 hours .

3.We have prfessional technical team to help customers solve technical problems .

4.Hotel project hospital factory fire alarm system project can be made .

     ASENWARE is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider for 14 years.

    We always remember that quality is the cornerstone of our existence, and we will never reduce the quality for any reason.Our fire safety products ,solutions and services are used in over 100 countries. 

     We have an experienced R&D team to design special electric product for test and control usage.
We have been striving to provide customers with satifying service before, during and after sales.

Payment terms :T/T L/C Western union .

Delievry time :usually about 2 to 5 days .Mass product about three weeks .

Warranty :one year

Certificate :CE LPCB ISO9001

Technical support :yes