Brand：	none
Address：	China
Min.Order：	none
Supply：	none
Valid until：	Long Term
Type：	Array

Product Details

Overview

Quick Details

Packaging Type:: wood

Packaging Material:: Wood

Type:: Filling Machine

Condition:: New

Application:: Chemical

Automatic Grade:: Automatic

Driven Type:: Electric

Voltage:: 220v/50hz

Power:: 1.1Kw

Place of Origin:: Zhejiang, China

Brand Name:: SINAT

Model Number:: SSGMT-C

Dimension(L*W*H):: 530x450x420mm

Weight:: 59kg

Certification:: ECM certificate

Filling Machine name:: Automatic fire extinguisher filling production line

Filling Machine power:: 1.10kw220V/50Hz

Filling machine N.W.:: 59kg

Filling machine size:: 530x450x420mm

Filling machine Speed:: >3kg per minute

Filling machine application:: filling CO2 fire extinguisher / fire service

Filling machine Velocity:: 750r/min

Filling machine pump:: three plungers style

Machine Output Pressure:: 140bar

Machine Pressure gauge:: pre-set pressure as 120bar

After-sales Service Provided:: No overseas service provided

Supply Ability

Supply Ability:: 1000 Piece/Pieces per Week Automatic fire extinguisher filling production line

Packaging & Delivery

Packaging Details: 56x47x45cm per one wood package
Automatic fire extinguisher filling production line

Port: Shanghai

Item Descriptions:

Automatic fire extinguisher filling production line

GMT-C CO2 Filler is a small type and portable filler. Both the flask with siphon and

Medial- pressure tank can be used CO2 filling.

Filler must connect with CO2 steel flask while on filling. Meanwhile, the nozzle of the flask must be standard nozzle.

Must use electronic scale as basis of filling weight while on filling.

This GMT-C CO2 Filler does not include electronic scale.

Technical Parameters:

1. Voltage: 220V/50Hz

2. Power: 1.1KW

3. Velocity: 750r/min

4. Pump: three plungers style

5. Filling Volume: Max.-3Kg/min

6. Max. Output Pressure: 140bar

7. Electric Contact Pressure Gauge: pre-set pressure as 120bar

8. Weight: 59Kg

9. Volume: 530×450×420(mm)

Troubleshooting:

Fault	Cause	Solution
Pump does not generate pressure	1. The supplying flask not opened.	Open the supplying flask.
	2. The supplying flask does not have siphon.	Replace the supplying flask.
	3. No gas in the supplying flask.	Replace the supplying flask.
	4. Filter blocked. (Figure 2)	Decrease the filler"s pressure to check whether the filler is contaminated.
	5.Pump leaking.(Pump Indicating Figure)	Decrease the filler"s pressure to dismantle the pump body, clean pump parts, and replace the damaged rubber washer.