Battery operated Ozone sterilizer ultraviolet LED light UV Lamp

How it Works

This product is a portable disinfection and sterilization lamp with a lithium battery charging function and a sensor switch function. It uses LED ultraviolet disinfection and sterilization technology with a sterilization rate of 99.9%. The product has no radiation and cares for your health anytime, anywhere.
 

Using the UV sanitizer
Our UV sanitizer could be powered on by a USB charger. It can be connected to USB for power supply. Press the on/off button, the lamp turns blue, you can use it to scan any place you want to disinfect. 

1. Power on / off: press and hold the power button for 2 seconds to turn on. After powering on, press the power button in any mode to turn off.

2.There are three pre-set time functions: 10 minutes, 20 minutes, 30 minutes.

Press the power button, turn on the UV lamp and continue working, or press the other buttons to set the working time: 10 minutes, 20 minutes, 30 minutes. After 10mins or 20mins or 30mins, the indicator LED light will turn off and the device will automatically stop.

3. Infrared detection function: 3 seconds countdown in working mode to enable infrared detection; turn off the UV lamp when a human body approaches; if the human body movement cannot be detected within 10 seconds and the sterilization lamp continues to work until the set time. (Note: Intelligent infrared detection can not sense the static human body, please do not stay in the irradiation range during sterilization)

Application

This product uses 185-254 nanometer ultraviolet ray for sterilization, and the lamp produces ozone at the same time. Ozone performs 360-degree sterilization and deodorization for a variety of scenarios, such as cars, cabinets, kitchens, toilets, wardrobes, shoes, pet rooms, bedrooms , Living room, etc.

Under closed conditions, the sterilization effect is better.

Technical Parameters

FAQs

Q: How long does it take to charge the unit?

Answer: Use the 5V1.5A charger for about 2-3 hours,

Q: Is a certain charger suitable for charging this product?

Answer: As long as the voltage output is 5V + 0.25V, the charger with current 0.8 ~ 3A will do.

Q: How to charge in the car?

Answer: Connect the charging cable to the 5V car charger, and insert the car charger at the cigarette lighter port to get power.

Q: How long can this product be stored?

Answer: If the battery is not used for a long time, the battery will consume power. Please charge the product once a month.