Brand：	none
Address：	China
Min.Order：	none
Supply：	none
Valid until：	Long Term

Product Details

Design Support

Support to lighting designers, offering the widest and most unique photometric portfolio, allowing simulation of the performance of our products for various retail projects.

Projects developed according to the standards and maximizing the energy saving: even a small reduction of Watt per luminaire makes a difference in the long run. On request we provide a complete lighting evaluation, including a 3D model .

Economic assessment of the project, with analysis of the upfront cost, energy savings, payback time and white certificates, including the installation cost and future maintenance.

Further than producing luminaire, we dedicate to create best illumination experience with our partners over the wolrd, and win the projects together.

Quality Assurance

Reliable Thermal Management

Citizen C.O.B applied, with Absolute Maximum Junction Temperature 160°C capability.

All LED luminaires produced in Heliang are estimated carefully to ensure Tj (Junction Temperatre) of LED is under 85°C. Tj is the major indicator for measuring the lifespan of a luminaire.

Reliable Silicone by Shinetsu OSR-500

ShinEtsu OSR-500 silicone, provide 2.5W heat conductivity coefficient after 2500hrs 20psi 85℃/85%RH, and -40centi degree /30min <->125℃/30min aging test.

Die-casting Aluminum & Coating

All Luminaires in Heliang are processed with proper Powder Coating Process, with a complete procedure of cleaning and powder coating.

Akzol Nobel Interporn Powder Applied to ensure the strength of coating layer and color consistency in different batches.

Mechanical Reliability

4 wires 3phase track adaptor applied, maximum load 20Lbs, made of PC material, reliable for long lifespan service.

All driver devices inside of luminaire is fixing properly with screws, which is much more reliable than Glue work, and provide possibility of maintenance if necessary.

Reliable Grounding wiring inside, comply with safety directives.

Optic reflector & COB

PC reflector with top quality electroplate, provides 3 beam spreads optional, 15/24/38 degree.

Proper COB holder designed with reserved space for thermal expansion of COB Light Emitting Surface.

Technical Parameter

General Parameters
Coating	Powder Coating
Color	Sandy black, sandy white, Silver optional
Material	Die-casting
Tj	89.5°C
Track Type	3phase 4wires

Electrical Parameters
Rated Power	35W
Input Voltage	220~240VAC, 50Hz
Control	Triac Leading Edge Dimmalbe
Track Adaptor	3Phase_4wires
installation	Surface Mount / Suspension

Optical Parameters
Beam Angle	15°/24°/38°
C.C.T	2700/3000/3500/4000 Kelvin
CRI	>90 as standard, 97 typ. same price.
R9	>50 (@CRI90) >90 (@CRI97.)
SDCM	<3 ( McAdam Ellipse)
Luminous Flux	3000Lm
Luminous Effi.	85Lm/W