CBL04 ICAO LED Obstruction Light Control Box, led aircraft warning lamp Control Box
CBL04A Control Box employs MCU IC control technology. With a pre-programmed software, CBL04A can control up to 4 aviation obstruction lights. When any light fail, the control box will send a alarm signal to alarm device in BTS in order for maintaneance staff to replace the light immediately. if needed, it can turn on all light in the system and make them flash at the same time. (Control box that can control more than 4 lights are also available upon request).
A photocell is included with the control box, which can turn on/off the system at dawn/dusk. The photocell should be installed in open environment.
CBL04A added a extra surge protection than CBL04. The surge protector can risist up to 65KA, 2.2KV
Functions Features--Controlseveral lights flashing synchronously
--Led indicator, in case of light failure, the control panel will give an alarm, at the same time, led
indicatorwill show.
--The alarm signal is relay contact, inactive.
--With override manual switch—can switch ON/OFF the light when the photocell is not available
--With external photocell, in case of photocell failure, the control will give an alarm
--With service and standby function, when the service fails, the control panel will switch on the standby
light automatically. Additionally, the lamps will alternate operation in 24 hours cycles to ensure the
housing does not overheat
Operating voltage | DC48V/AC110V-240V | Alarm output | 4channels |
Control sub channel | 4 channels | Flashing rate | 20~60times/mins(Adjustable) |
On/off level | 70~100Lux | Alarm | Dry contact alarm |
Steady burning and flashing mode available |
Operating temperature | -30degree ~ +70degree | IP Protection | IP65 |
Relative humidity | 10% ~ 95% (No coagulation) | Weight | Outdoor:5.5Kg |
Material | Cold rolled steel/Stainless steel(optional) |
Customer Reviews total 0 items