Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Product Overview
The CertaDrive LED drivers are designed to fulfill the market need for essential lighting. The CertaDrive LED drivers offer basic specifications such as specific current and voltage settings, optimal to operate CertaFlux LED modules. Life time of the driver is set at 50,000 hours. Philips will extend the portfolio of CertaDrive LED drivers to match high volume CertaFlux LED line propositions as well as high volume opportunities of other LED board manufactures.
Benefits.
• Design freedom
• Optimized to operate CertaFlux LED lines
• 3-years warranty
Features.
• Small dimensions
• Specific current and voltage
• 50,000 hours life time
• Fast Time to Market
Application.
• Waterproof luminaires
• Recessed, surface and suspended luminaires in offices
• High bay luminaires
Electrical Input data
Specification item | Value | Unit | Condition |
Nominal input voltage | 220...240 | Vac | performance range |
Nominal input frequency | 50...60 | Hz | |
Nominal input current | 0.3 | A | @230V @ full load |
Input voltage | 230 | Vac | |
Nominal input power | 67 | W | @230V @ full load |
Power factor | ≥ 0.9 | @ full load. See graph. | |
Total harmonic distortion | ≤ 20 | % | @ full load. See graph. |
Efficiency | 93 | % | @230V @ full load |
Nominal input voltage DC | 186...250 | Vdc | |
Nominal input current DC | 0.3 | A | Input voltage 230 Vdc, full load |
Input voltage AC | 202...254 | Vac | Operational range |
Electrical Output data
Specification item | Value | Unit | Condition |
Regulation method | Constant Current | ||
Output voltage | 120...170 | Vdc | |
Output voltage max. | 340 | V | Peak voltage at open load |
Output current | 0.36 | A | Full output current setting |
Output current tolerance | ± 8 | % | |
Output current ripple LF | ≤ 30 | % | Ripple = peak / average |
Output power | 43...61 | W | Full output |
Electrical Data Control Input
Specification item | Value | Unit | Condition |
Control method | Fixed |
Operational Temperature and Humidity
Specification item | Value | Unit | Condition |
Ambient temperature | -20...+50 | ºC | Higher ambient temperature allowed as long as Tcase-max is not |
Tcase-max | 80 | ºC | Maximum temperature measured at Tcase-point |
Tcase-life | 70 | ºC | Measured at Tcase-point |
Maximum housing temperature | 110 | ºC | In case of a failure |
Relative humidity | 10...90 | % | Non-condensing |
Lifetime
Specification item | Value | Unit | Condition |
Driver lifetime | 50,000 | hours | Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10% |
Programmable Features
Specification item | Value | Remark | Condition |
Set output current (AOC) | No | See Design-in guide. | Default output current: = 360 mA |
LED module temperature derating (MTP) | No | ||
Constant Lumen Over Lifetime (CLO) | No | ||
DC emergency dimming (DCemDIM) | No | ||
Corridor mode | No | ||
Energy metering | No | ||
Diagnostics | No |
Features
Specification item | Value | Remark | Condition |
Open load protection | Yes | Automatic recovering | |
Short circuit protection | Yes | Automatic recovering | |
Over power protection | Yes | Automatic recovering | |
Hot wiring | No | ||
Suitable for fixtures with protection class | I | per IEC60598 |
Dimensions
Specification item | Value | Unit | Condition |
Length (A1) | 209 | mm | |
Width (B1) | 30 | mm | |
Height (C1) | 21.5 | mm | |
Fixing hole diameter (D1) | 4.1 | mm | |
Fixing hole distance (A2) | 195 | mm | |
Weight | 148 | gram |
Packaging | ||
Size | 26*21.5*13.5cm | |
Weight | 12kg | |
Packaging Details | Led Drivers and modules: Philips original carton packing with MOQ.( 12pcs in one carton.) Led Light: Philips original carton packing(usually 1pcs in one carton) Customize shipping packing (eg Composite wooden pallet, cardboard pallets and composite wooden cases package) are available at additional cost. | |
Shanghai Bipeng Lighting Limited Company is the core distributor of Philips professional lighting products. We mainly focus on LED Drivers and Modules, LED lights which are mainly applied on roads and Industry factories. Every product catalog is composed of over hundreds of product code.
We can offer out standing lighting solutions, depending on our high efficiency management team and strong technician team. Through these years' efforts, we have been recognized and appreciated by many clients coming from mainland,southeast Asia,Europe and America market.
We promise to providing our clients with high quality products and services. At the same time, we have been working with excellent Surge protective device Manufacturer- CITEL and LED dimming Products Manufacturer -EUCHIPS.
Q1. Are you Philips Authorized agents?
A:Yes, we can offer Philips Authorized Certificate.
Q2: What's your main products?
Led Drivers and modules. Road Light, Street Light and Highbay Lights.
We still can offer one step lighting Solution, depending on good cooperation relation with China(mainland) Lighting Manufacturers.
Q3. How about the delivery time ?
LED driver and modules Sample: 5-7days
LED driver and mudules Bulk Order: need recheck with us, usually 30-40 days.
LED Lights(sample& Bulk Order): need recheck with us, usually 30-40 days.
Q4. What is the Transaction terms ?
A: Samples: Cash before shipping.
B: Bulk Order: 50% in advance(deposit), 50% of the balance should be paid before shipping.
Q5. How is the Logistics and Transportation time ?
A Samples: International Express Service- DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
B.Bulk order : Airline and Sea shipping are available. Transportation time: need recheck with logistic company.
Q6. Do you have a minimum order?
Bulk order: Philips Original MOQ Packing(usually, 10pcs -12pcs in one carton).
Q7: How Long is the Quality assurance Time?
Philips Official Quality Assurance Time(Usually, 3-5years depend on products.)
Customer Reviews total 0 items