Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
China Factory 5W 30cm 60cm Light 12v 24 Volt Dc T5 Led Tube
Unique Features:
It is used to replace existing Fluoro tubes in Motorhomes,Caravans, Cruise ship, RV, people don’t want to replace the whole unit as the screw holes never line up properly and the original ones have covers.
Take off the old T5 T8 fluorescent tube, then install this led tube light on the bracket fitting.
Its a replacement tube only, it has polarity sensitive as there are a number of ways the original fittings are wired up, some are positive one end and negative the other and also vice versa, some are negative and positive at one end and no wires at the other,
we take it one step further, to have the driver built inside the tube so the tube can run on 12-24VDC in whatever housing it is put into.
12V 24V DC 300mm 531mm 225mm LED Tube T5 5W LED Marine Light Unique Models:
T5 Series, Patented DC12V-24V, G5 base, SMD3528 LED, No need ballast
| Model No. | Tube Size | Input Voltage (V) | Power (W) | Luminous Flux (LM) | Replace Light |
| LE-DCT5-225 | 225*Φ16MM | 12V DC, 24V DC | 4W | 350LM | Replaces: 9" F6T5 fluorescent tubes |
| LE-DCT5-300 | 300*Φ16MM | 12V DC, 24V DC | 5W | 440LM | Replaces: 12" F8T5 fluorescent tubes |
| LE-DCT5-531 | 531*Φ16MM | 12V DC, 24V DC | 6W | 550LM | Replaces: 21" F13T5 fluorescent tubes |
Besides,
we have 36V DC LED Tube Light,
and 12V DC 24V DC 451mm T8 LED Tube light to replace Replaces: 18" F15T8 fluorescent tubes, please contact me for more details.
1feet 12V 300mm LED Tube T5 5W LED Tube Light for marine, caravans, motorhome Application:
Marine, solar systems, battery, ATM machine of Bank, other machines, motorhomes, caravans, boats, steamship, power shortage areas etc. and other places where working in DC low voltage)
12V 24V DC 300mm 531mm 225mm LED Tube T5 5W LED Marine Light NOTE:
These LED bulbs have our built-in constant-current driver already installed,
but they do not require the high-voltage ballast that is in your current fluorescent fixture. These are not for 120VAC home use.Only DC10-30V input voltge allowed.
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 100pcs
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%;
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Customer Reviews total 0 items