1.Product Description

 The CET-108A LED flood light’s light source is a 2835SMD with a high luminance, and the power of a single LED chip is 0.5 W. The optional power of LED flood light ranges between 10 and 300W.

2.Specification

3.Features

1.Have a special life span

2. Energy-saving: Compared with incandescent lamp, energy-saving up to 75%, 85W floodlight fluxes and 500W incandescent lamp fluxes roughly the same.

3. Environmental protection: It uses solid mercury agent, even if broken will not cause pollution to the environment, there are more than 99% of the recoverable rate, is the real environmental protection green light source.

4. No stroboscopic: Because of its high frequency of operation, it is considered as "completely without stroboscopic effect", will not cause eye fatigue, eye health protection.

5, good color rendering: color index is greater than 80, light color soft, showing the natural color of the object.

6. Color temperature optional: from 2700K to 6500K by the customer according to the needs of choice, and can be made into color bulbs for garden decoration lighting.

7, the visible light ratio is high: in the emitted light, the visible light ratio is more than 80%, the visual effect is good.

8, no need to warm up. It can start and restart immediately, and there will be no light fading phenomenon in ordinary electrified discharge lamps.

9. Excellent electrical performance: high power factor, low current harmonics, constant voltage supply, output constant light flux.

10, the installation is adaptable: it can be installed in any direction without restriction.

4.Installation Guide   

      1.Loosen the screws on the bracket, and mark the drilling position on the installation site.

      2.Drill a hole on the marked position.

      3.Attach the bracket to the installation site using screws.

      4.Attach the lighting fixture to the bracket using screws.

5.Application

Main applications: billboards, highways, railway tunnels, bridges and culverts, squares, buildings, etc.

6.Packaging&Shipping

7.CERTIFICATE

8.FAQ

Q1: Can I have a sample for testing?

A: Yes, we can offer free sample, but you should afford the shipping cost.

Q2: Can I add my logo on the products?

A: Yes, OEM and ODM are available for us.

Q3: How can I get the after-service?

A: We will send you the free spare parts if the problems caused by us. If the products cannot be repaired, we will send

you new free quantity together with next order.

Q4: Do you have inspection procedures for products?

A: our products100% self-inspection and testing before packing. 

Q5: Can I have a visit to your factory before the order?

A: Sure, welcome to visit our factory.

Here is our factory address:  #7 Tongyi Industrial Area, Zhongshan City, Guzhen

Our factory is near Guangzhou airport, and we can pick you up in the airport,   Hotel booking service is available.

Q6: How about delivery time of the order?

A: 15-20 days after getting deposit.

Q7: How about payment terms?

A:  20%-30% deposit, the rest payment balance against B/L. If have regular order and good order quantity, we can give

delay payment.

9.Contact Us