2.Features
1, This machine adopts 3D Dynamic Galvanometer Control System. Original Imported 180W/275W metal
RF laser tube. Laser power supply and cutting speed can be adjustable, maximally energy saving. 2, Fully enclosed laser optical system, no adjustment or maintenance needed, can be used directly after
installation. 3, Original imported metal RF laser tube with high laser power, excellent laser spot, stable laser generation
and lifetime of more than 20000hrs, gas inside the tube can be refilled again. 4, American CTI 3D dynamic Galvo head, one time scan area could reach to 1500*1500mm. 3D dynamic
galvanometer control system and automatic up&down Z axis ensure the best processing results. 5. Large-scale marking engraving cutting dotting and hollowing on leather, shoe, denim, jeans, textile,
fabric, invitation paper card, wood, MDF, acrylic, marble and more flexible materials. 6. Equipped with foot switch for easy operation. Back and bottom exhaust fans ensure good exhaust
suction effects and environment friendly processing. 7, High precision and speed performance with cutting&engraving working, 20% higher efficiency than the
similar models in the market. 8, Professional industrial thermostatic circulation of water cooling system ensures more stable running and
lower consumption. 9, Strict multiply protection control system can be applied in wild operation temperature, to make sure the
stable continuous working of 24h of laser marking system. 10,With Sunic Laser self developed software, various formats are supported according to your requirements. Application under Windows interface, AutoCAD, CorelDraw, Photoshop compatible, PLT, DXF, BMP, AI ect
supportive. 11, Especially applies RBI marking with light guild plate or acrylic, and cutting&engraving with leathers,
jeans, textile, wood, MDF, acrylic and shoe insole.

 

3.Advantage of CO2 Dynamic Laser Marking Machine  

 

1. PermanentMark will not substemperature etc  

2. Non-contact
Laser marking is a non-mechanical “light knife” for processing, the workpiece will not produce stress after
marking. The working surface will not produce corrosion, no “tool” worn, non-toxic, non-polluting.

3. Wide application
CO2 Dynamic Laser Marking can work on all non-metal materials(Textile, Leather, PMMA, Wood, MDF, Paper, Marble, Glass etc.)
4.High precision for engraving&marking
CO2 Dynamic Laser Marking Machine can engrave fine pattern, the minimum line width can reach to
0.04mm. Engraving&Marking result is clear, durable and beautiful.

5. Low operating costs
Low energy consumption, no consumptive materials, and therefore lower operating costs.

6. High efficiency
CO2 Dynamic Laser Marking Machine’s Engraving&Marking speed can reach to 7000m/s, three times than
that of traditional laser marking machine, marking process can be completed in seconds.

7. Large marking area
With the high power laser tube and the 3D Scanner technology, the CO2 Dynamic Laser Marking Machine
can work on large size materials such as the clothes processing, leather processing, LGP(Light Guide Plate
for LED Panel Light and TV) processing

8. Easy development
Due to the combination of laser technology and computer technology, the laser print can be realized by the
order from the computer program, and may change the print design at any time, replaces the traditional
mold marking process from the fundamental, shorten the product upgrade cycle and provide a convenient
tool for flexible production.

  

4. Machine StructureCO2 Dynamic Laser Marking Machine adopts imported laser tube and high speeLaser self-developed linear 3D Dynamic Focusing System, device control system, software and the high precision thermostatic water cooling system. Machine’s Control section is focused on the Electrical main control section. The wcomponents are focused on the optical main beam and inside the square head througdesign. The integrated water chiller provides a circulation water cooling system foworking. CO2 Dynamic Laser Marking Machine mainly includes the following part  

 

Water Cooling System,  Electrical Control System,IPC&Marking Motion Card, Sunic Laser Self-developed Control Software, Exhausting Syst

 

Technical Term
Type	Model SCM3000
Laser Mode	1500*1500mm
Wavelength	10.64
Laser Power	250wat
Power Stability	≤0.5%
Laser Source	Coherent CO2 metal RF Laser Tu
Marking Speed	≤10000mm
Repetition Precision	0.01mm
Scanner	CTI America

 

Frequency	20kHz~200kHz
Working Area	1500*1500mm
Laser Head	Gavol Scanner
Cooling Way	Circulation of Water Cooling
Power Supply	110V~380V/50Hz~60
Softwar	Integrated Function of Dotting Design, Vector Drawing, Marking, Scribing and Cutting
File Format	PLT, PCX, DXP, BMP, JPG etc

Output Compatibilit

AutoCAD, CorelDRAW, Photoshop etc

Warranty: Two Years

We offer free Two-years warranty and durable maintenance&repair support for the purchased machines. Within
the warranty time, we are responsible for the cost-free repair once the equipments fail or the machines break
down(except human factor and force majeure causes) and we shall offer the replacement parts for free(except
consumed parts). During the non-warranty time, we just charge the flat cost based on actual cost of repair.

After-sale response time: 24 hours. Once being informed to repair the machines, the after-sale engineer can
definitely answer you or arrive on the scene within 24 hours.