dc 5-24v 12 channel diy-usb matrix rgb led controller programmable

rgb led controller programmable
1. input dc 5-24v,matrix 12 channel
2. diy-usb, full color
3. addressable

Technical Parameters:

Summarization:

1, a single monochrome leds can control 12 road runners, 7 colour number 4,

2, DC5~24V wide working voltage, can control the leakage light, modules, light bar.

3, 12 road output, each output current up to 5 a, support monochromatic visible light, modules are 3000

4, more than one can cascade synchronous controller, can control up to 120, the effect can be modified, the USB download, simple and convenient operation, strong randomness

Connection mode  

When more than one controller synchronous cascade demanded the controller address code as follows upon to determine the order

Example 1: < instance 1. Exe > create a light all the way from the first to last 12 road flash 3 times (jump) every picture delay time can define your own

Example 2: < instance 2. Exe > make a effect from 1 to 12 road light and from middle to both sides, from middle to both sides again bright (jump)

Example 3: < instance 3. Exe > create a gradient light all the way from the first to the no.12 (gradient)

Example 4: < instance 4. Exe > create a wavy gradient from running (gradient)

Example 5: < instance 5. Exe > create a 36 monochromatic light all the way from the first to the 36th road, road, and then destroy all the way from the first to 36 (gradient) pay attention to how to increase controller

Example 6: < instance 6. Exe > create a colorful bright all the way from the first to the fourth way, every road is not the same color

Example 7: < instance 7. Exe > create a colorful bright all the way from the first to the 12th road, each color is not the same (to increase to 3 controller)

Example 8: < instance 8. Exe > create a colorful gradient all the way from the first to the 12th road, every road is not the same color

Example 9: < instance 9. Exe > download effect to the controller (the controller connected to the computer with USB cable, the controller will bright lights, controller don't need to connect power, the software will automatically detect whether success is connected to the controller at this time)