Dimming 240W Square LED Post Top Fixtures 5000K outdoor led garden light

PRODUCT DESCRIPTION

The area series has the high-performance solution for the most demanding applications within a unique design. With different precision refractive optical lens and an easy-install design,it can be used in many applications such as pedestrian street, factory, schools, garden, courtyard .hotel .parking lot.public parks etc.

FEATURES

1.Air cooling Design.
2.IP67 Rated Enclosure.
3.Post top or Pendant Mounting.
4.Superior Low-glare Illumination.
5.Optional with Photo Cell.
6.Optional Beam Angle 25° 60°. 

lf the customer does not specify a requirement, the inner diameter defaults to 62mm(2.44in).

Notes:
1.130lm/w,150lm/w is optional.the default is 130lm/w.
2. Customers can choose a lamp with a baffle as needed. Special Ord er-Ask Customer Service.

PERFORMANCE DATA

PROJECTS
By using our 200W Area Light to replace 600W Metal Halide bulb for parking area lighting fixtures.the customer is now able to save a lot per month from his electric bill.

Notes:

1.Don't take the LED lamp apart.
2.The LED lamp must work under the right voltage according to the specification.

LUMINOUS INTENSITY DISTRIBUTION

APPLICATION
1. Courtyard lighting
2. Public parks lighting
3. Street scapes lighting
4. Parking areas lighting
5. Hotel lighting

INSTALLATION
Fixture assembly
1.Feed the Housing wires through one of the four Rods.
2.Clip the Rods onto the Housing. Be sure the Housing clips are properly engaged onto the Rods.
3.Feed Fixture Wires through the Tenon Pole Adaptor.
4.Slide Tenon Pole Adaptor on three Rods. Be sure the notches face the inside of the Tenon Pole Adaptor.
5.Tighten the Set Screws at the Tenon Pole Adaptor to secure Rods.

Pole mounting

1.Turn off the power before installation.

2.Wiring right in the wiring box("Black" is connected to "L","White connect to "N","Green" to "Ground") and set the lamp into the bracket by the hole.(picture 1).

3.We should fasten the four screws with a hex wrench,and finished(picture 2).