Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Product Details
- Place of Origin:
- Guangdong, China
- Brand Name:
- OEM/EVEN
- Model Number:
- EME-EL
- Output Power:
- Total Power
- Output Type:
- DUAL
- Input Voltage:
- 85-265V AC
- Output Frequency:
- 50-60Hz, 50-60Hz
- Output Current:
- Cusom
- Key Products:
- EMERGENCY TERMINAL BLOCK FOR LED EMERGENCY POWER PACK
- Mode of operation:
- Maintained
- LED Application:
- LED Light With External Driver
- Storage Temperature:
- -20--80°c
- Impedance:
- <20
- Input Voltage(V):
- AC85-265 V50-60Hz
- Emergency time:
- 1/2/3hrs
- Emergency Brightness:
- 10-100%
- Accessaries:
- LED indicator/test buttom
- Output Voltage:
- Custom
- Supply Ability:
- 4000 Piece/Pieces per Day emergency power pack
- Packaging Details
- Paper box (customized)
- Port
- Hong Kong/Shenzhen
- Lead Time:
- Sample(7days) ,Order(18days)
Model No. | EME-EL |
Product Name | Emergency Conversion Kit |
Battery Type | Ni-CD/Ni-MH/18650 Li-ion Battery |
Lighting Power | LED Light With External Driver |
Emergency Power | 10-40W |
Input voltage | AC85~265V, 50/60Hz |
Battery protection | Yes |
Operation temperature | -20--70℃ , 65+20% RH |
Highest Surface Temperature | 50°C |
Battery Capacity | 10*2800mAh Rechargeable Nicd battery pack |
Charging Time | >24h without break |
Emergency Output | Custom |
Suitable light source | Suit for indoor light |
Emergency power | 30% |
Emergency duration | 3hours |
Inverter dimension | 155*40*30mm |
Outer casing size | 360*105*45mm (Custom) |
Note | Custom battery pack according to different backup time and and the brightness when emergency |
EVEN provides custom-made emergency pack EMI-LT for 110-220V AC high voltage emergency lighting conversionkits,designed specifically tosuit led light has internal driver,such as led tube,led bulb and son on.EME-EL for designedspecifically to suit most constant current type led,low voltage utilizing DC/DC switcher circuitry.Mainly applied to LED panel,led downlight,led ceiling lamp ect.EMF-EL for widely used for all of fluorescent lamps including T5/T8/PL/CFL/2D and so on.
Product Feature
1. Intelligent automatic recharging and converting function
2. Constant current battery charger
3. 1/2/3 hours emergency operation
4. Led charge status display
5. Inverter with multiple protection functions:charge protection,discharge protection,
short circuit protection
6. Facility for a Test switch to inspect between Emergency and normal lighting function
7. Supplied with high brightness green/Red LED (manual test)
8. Complete with flex and plug
9. Push-wire terminal blocks for easy wiring installation
10. High quality of NiCD or NiMH rechargeable battery with 2 years of life.
11. Small volume, convenient and flexible installation
Attentions
1. Pay extra attention to the negative and the positive pole of the battery in order to prevent reverse operation, please use designated and matching batteries and ensure all wiring is done correctly and stable before use.
2. If you need to do product testing, unplug the battery pack when the emergency device is disconnected from the mains supply, and then plug in the battery after the emergency device is completely shut down.
3. Comply with the wiring connection circuit diagram completely, prevent from over loading and non loading in the process of use and testing.
4. In order to prolong the battery powered lighting time, all indicator lights are switched off during normal use with the emergency power system in standby mode.
5. The battery is not charged before leaving the factory; please charge the battery longer than 24 hours before use.
6. In general, the battery needs to be fully charged and discharged for around 3- 5 times in order for the Ni-CD/Ni-MH battery to operate at full capacity.
7. It is detrimental for the Ni-CD/Ni-MH battery to lie idle for a long time, especially when it runs dead. Charge the battery completely when it is out of operation for a long time. (The battery cannot lie idle for more than three months)
ABOUT US
Even Technology is the only professional manufacture who produces emergency accessaries for lighting.As you know,high quality makes from specialty.
Our products major in:
- High Voltage Emergency Pack
- LowVoltage Emergency Pack
- Constant Voltage Emergency Pack
- Fluorescent Tube Emergency Pack
- Universal Emergency Pack
- Combined Driver Emergency Pack
- Build-in Battery Pack Emergency Pack
- Rechargeable Battery (NiCd, NiMH,Li-ion and its packs)
- Emergency Luminaries Products
Our factories are set inside mainland China, in order to provide low manufacturing cost for you to win more market.
Why Choosing Us
LED lighting plays a key important role in daily life,accordingly,the emergency kit is also important within this products.
Emergency Lighting Inverters need professional understanding of battery specification to get good performance. We develop our inverters inch by inch to best fit lights and battery.
Therefore, rather than its price, the reliability is the top factor to consider.
More experiences we have,more professional will service for you.
You are most welcome to contact us by Skype, e-mail, telephone call or even walk in to talk to us. We will try best to get best solution for you.
OEM/ODM for wholesales and retailers who need emergency project.
Customer Reviews total 0 items