ESSHIN Solar ultrasonic light Animal bird mosquito pest repeller

solar animal repeller  Specifications:

 1. Solar panel:2V/45MA

2. Solar Size:70×90MM
3. Power Supply: NI-CD 1×1.2V/300mAH "AA" Ni-Cd  
4. Material:ABS+Aluminum
5. Ultrasonic Frequency: 400-1000HZ  
6. Product Size:38*15*15cm

 solar animal repeller CAUTION:

Allow the Animal Repeller to operate continuously for best results.
Do not immerse repeller in water.
Do not cover-up the PIR sensor.
To clean the repeller, use a damp-soft cloth and mild soap with water. Do not use harsh chemicals or abrasive cleaning agents that may damage the repeller.

1. Unpack the unit completely and confirm that all parts are present. SEE FIGURES 1-4 above.
2. Connect the repeller head, pole sections, connecting part and ground stake. SEE FIGURES 1-4 above.
3. Turn power switch to “ON” position. SEE FIGURE 2.
4. The PIR repeller is designed to be left ON continuously. It uses four “AA” size NiCD rechargeable batteries.
5. Once turned ON, the LED light and ultrasonic signal will activate for 15 seconds. Following this activation, the unit will move to stand-by
mode.
6. The unit is now ready for installation. The location should allow adequate sunlight to keep the batteries fully charged. Be sure that the area needing protection is within the effective range of the repeller. SEE FIGURE 2.
7. For best results, keep the repeller head roughly 9-10 inches above ground.
8. Take care not to stress or break the repeller when installing in hard ground. It is a good idea to prepare the ground for the ground stake to avoid damage to the unit.
9. When the PIR sensor detects motion, the LED light will flash for 3 seconds and the ultrasonic signal will run for 15 seconds. Following this, the repeller will return to stand-by mode.

Q1:Are you trading company or manuafctuer?

A1:We are manufacturer of solar panel and solar lamps

Q2:Why choose us?

A2:

*Provide professional person to communicate with you before the order.

*Provide strict quality check before each part, each process before export.

*Provide good pre-sales and after-sales service.

*We are professional manufacturer with well-equipped testing facilities and strong technical force.

Q3:What is the quality level of your product?

A3:We produce good quality,refuse to produce low quality

we promise 1 year warranty for all products.

Q4:Can you make customer’s brand?

A4:Yes,customer’s brand and customized design can be made

Q5:Can I get some samples to test the quality?

A: Yes, we can provide samples, We will return you the sample fee in next bulk order.

Freely contact us for further information