Twin Emergency Sensor LED strip batten
OPTIONS:
• 3 hour Maintained emergency with Ni-MH battery pack
• Microwave motion sensor
• Changeable Colour 4000K, 5000K and 6000K (NEW)
• Battery auto test for emergency version
Technical Specifications:
Parameters / Model | GL2F2008SERIES | GL4F4008SERIES | GL5F5008SERIES |
Model | 20W | 40W | 50W |
Size | 665 x 118x 80m | 1265 x 118x 80m | 1565 x 118x 80mm |
Power | 20W | 40 | 50W |
Input Voltage | AC100-240V 50/60Hz |
PF | >0.9 |
LED Type | SMD2835 LED Chips |
Lumen output | 2000Lm | 3900Lm | 4800Lm |
CCT colour options | 3000K / 4000K / 5000K / 6000K |
CRI | >80 |
Beam Angle | 110° |
IP Rating | IP65 |
Luminous Efficiency | 100Lm/W |
Operating Temperature | -10°C to 50°C |
Lifespan as per LM80 | 50000 hours |
Base and diffuser | UV Resistant Polycarbonate, impact resistant IK10 |
Driver Output Voltage | DC 36V |
Driver Output Current | 500mA ± 10mA | 1000mA± 10mA | 1200mA ± 10mA |
Warranty | 5Years |
| | | | | |
Optional Emergency (maintained)
Battery type | Rechargeable Heat resisting 9.6V 2200mAh Ni-MH |
Emergency Output | 3 to 4 Watt |
Emergency Duration | >3 Hours |
Charge Time | Less than12 Hours when fully discharged |
LED Emergency indicator | Red: charging , Green: fully charged, Yellow: faulty or disconnected. Green flash: auto test, Red flash: discharging(emergency mode) |
Test Button | Push and hold the button to test the emergency mode; release button to go back to AC power mode |
Technical specifications
Input voltage: 12V DC
Output power: 5V DC
Sensor principle:Microwave motion detector
Installation sit: Ceiling mounting
HF system: 5.8GHz+/-75MHz CW radar,ISM band
Transmission power:<2mW
Detection angle:360°
Detection range:1 -10m
Time setting:10sec to 5min
Motion detection 0.3.....3m/s(1...10km/h)
Advantages:
1.More than just a innovation in installation and maintenance
2.Touchless mode
Customer Reviews total 0 items