Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Factory direct remote control 7inch 30w marine led searchlight 12v 24v spotlight
Specifications
| Model | XZ-LED30W01 |
| LED power | 6pcs * 5w high intensity CREE LEDS |
| Dimensions | 7inch |
| Beam | Spot |
| Material | Diecast aluminium+Plastic housing |
| Life Span | above 30000 hours |
| Lens material | PC |
| Color temperature | 6000K |
| Vlotage | 10v-30v DC |
| waterproof | IP65 |
| Output Lumen | 2700lm |
| Housing color | Black,white |
| Motion range | Up and down 120 degrees, Left to r 360 degrees |
Features
LED Remote Controlled Magnetic Base Spot Search Light,30W high power led light produces up to 2700lumens of nature white light.Support 360degree rotating,and 120degree up and down.It have two install method,one is fixed on the car roof by screws,another method is installed by strong magnetic.Portable and Convenient in ant situations.
Suitable for roof mout on any car ,truck,RV,farm vehicle,boat or even home security.
The supplied bracket allows for mounting on non-metal surfaces where the strong magnets cannot be used
XUZUN is one of manufacturers in the field of auto lighting system in
in Guangzhou, China.
Established in 2009.With over 5 years of manufaturing experience and advanced management and excellent research&development team.
We insist on the principle of “Customer foremost , Quality First”
and keep improving our products,strictly implementing ISO 9002:2000
international quality assurance system.All of our products have passed CE, ROHS
and IP67 attestation.
Our Products include led work light ,led light bar, led driving lights,led headlight etc.
They are sold well in domestic market. And also sell to the USA, Argentina,
Canada, France, Japan, Malaysia, Germany, Italy, Spain, Turkey, etc.
Our workshop
As below picture show you about our workshop:
Prodution line,production equipment,test equipment ,original material,show room ect.
What the different types of beam patterns?
LED Spot Beam : 30 Degree (Narrow Beam) is a concentrated light pattern that is narrow yet very long.
This pattern produces more of an intense centre spot which lights up objects right in front of you, while sacrificing some side light. 30 degree Spot Beam is great for long distance Highway driving.
LED Flood Beam : 60 Degree (Wide Beam) is much wider LED light pattern than the Spot but has a shorter reach.
This is great for dispersing light and lighting up larger amounts of space on the track in front of you rather than far into the distance, making the led Flood work light ideal for low range 4×4 driving, frequent off-road use, tractor work light and mining light.
Combo Beam : Both Spot & Flood combination, This is a great all round led light pattern giving you distance and flood light. Combo beam is the most popular and widely use on led light bars today.
1.Road Vehicles: Automobile, truck, bus etc.
2.Off-Road vehicles: 4WD,SUV, UTV, ATV, tractor, trailer etc.
3.Industrial vehicles: Excavator, dozer, road roller, bulldozer, treedozer, crane, forklift,mining truck etc.
4.Other vehicles and equipment: Fire engine,rescue vehicle,boat, communication vehicle,military command vehicle, train, marine, ship, tank,agricultural vehicle etc.
Shipping:TNT,UPS,DHL,EMS,Fedex,Sea transportation
Payment term
Before shipment every finished products must be tested through all our testing
items and the failure rate is lower than 0.1%.
On the following items and within the warranty period, once identified, we can
change a new one for you.
The step,as below:
1.The mirror of light is cracked (not by outer force). You need mark the cracking
date on the light and then take a clear photo or video.
2.The PCB is out of condition. Please operate as the above.
Finally please notice that the wires of cutdown lights should be no less than 5cm.
Q1. What is the original place of your LEDs?
A1:The LEDs are imported directly from America.
Q2. What is your circuit board made of? How about the housing?
A2:It is Aluminum board. And the housing is made of aluminum alloy.
Q3. What are your testing items?
A3: They are waterproof test, aging test, burn- in test, shock test and saline water test.
Q4.Can we use our own logo in the light bar? What is the MOQ if we wanna do this?
A4: Yes. We have a laser machine that can engrave any word in the aluminum alloy body of the light bar.
The MOQ is one piece and besides, there is no extra cost for it.
Q5.How long does it take to prepare products for delivery?
A5: For small orders it is usually 1-3 days and for bulk ones, 15-25days
Q6. How long is the warranty period?
A6: It is 12 months.
Q7.What is the producing ability of your company?
A7:Now we have 10 producing lines in our factory.
How to contact us ?
Please send your Inquiry Details in the below .Click"Send"Now.Thank you.
Customer Reviews total 0 items