COB strip light COB soft light bar COB flexible strip light  flip chip COB strip light

	Specification	Light bar parameters
	Brand	Huangtai
	Type	HT-SX512F008W24-12-COB
	LED QTY	512 LED/m
	Chip manufacturers	Sanan/Epistar/Customized
	CRI	Ra85
	Input voltage	12v/24v
	Power	12w/m
	Luminous officiency	100-120lm/m
	Luminous brightness	1300k-1600k
	Board width	8mm
	Color temperature	2800k/3000k/4000k/6000k
	Cuttable length	31.5mm
	Working lifetime	50000h
	Working temperature	-20℃-40℃
	Warranty	3 years

Advantages of the new soft light bar

         1.Widely used, easy to install and maintain, long service life

      2.Very flexible, easy to bend into different shapes, various white light options
      3.COB Design, with more chips on PCB, more even light.
      4.Up to 512 chips on 1 meter PCB, only 2.0mm space between chips.
      5.Cuttable at every 63mm length. Form a circuit without affecting other circuites.
      6.Efficiency up to 100Lm/W.
      7.Ra 90 also available.
      8. Can be customized according to customer requirements

Installation Ways

     * The max running length is 6 meters, for over 6 meters please connect in parallel.

     * Make sure of the total watts of COB Strip lights is less than 80% of the power supply's 
max output.
     * Match the polarities according to the mark ('+' and '-') in the PCB while connecting.

Installation precautions

     1. In the installation process, sharp objects should be avoided from touching the surface of the lamp strip, so as not to damage the colloid and cause undesirable effects;

     2. Avoid contact of colloid in luminous area with high-temperature objects to avoid scalding colloid and affecting linear effect;

     3. Select DC24V stabilized voltage power supply to drive, and select a power supply with appropriate power according to the number of lamp strips to be installed;  The total power of each power-driven lamp belt shall be less than 80% of the rated power of the power supply;

     4. It is strictly prohibited to bend or twist the lamp strip in a short distance to avoid damaging the rubber strip or damaging the internal electrical structure of the chip, as shown in the figure 4:

    5. Pay attention to waterproof and moistureproof.

    6. it is suggested that any bending diameter of the lamp band should be > 1CM, as shown in the figure 5:

Application

1. Residential lighting,
2. Hotels, KTV and other places of entertainment decorative lighting.
3. Furniture decoration lighting
4. Display cabinet, jewelry cabinet counter lighting
5. Lighting of concealed parts of corridor stairs

1. Our chips have high brightness, low attenuation, low energy consumption, long life, strong antistatic ability. All products are packaged in silicone, which meets the requirements of environmentally friendly lead-free process products. High brightness and good light and color consistency;LED patch life is more than 50,000 hours; using high-quality silicone glue packaging, low light decay, long life;

2. We have mastered the latest production technology of flexible light strips. The new flexible light strips are versatile, easy to install and maintain, and have a long service life. Very flexible, easy to bend into various shapes, there are a variety of white light options. COB design, more chips on the PCB, more uniform light. Up to 512/528 chip PCB on 1 meter, only 2.0mm spacing between chips 45 / 63mm length can be cut. Form a circuit without affecting other circuits. Efficiency up to 100Lm / W.Ra 90 is also available. And we can provide customized services.

3. The company has a full set of international advanced automatic solid crystal machine, wire bonding machine, glue sealing machine, spectrophotometer and other equipment. Huangtai Optoelectronics is committed to providing customers with the highest quality products, services and solutions to create more value to win customer satisfaction and trust. The company mainly produces SMD LED (CHIP LED & TOP LED), high-power LED and other products. The products are widely used in LED full-color display, indoor lighting, LED backlight and other fields.

4. Adhering to the business philosophy of "Keep improving, casting perfect quality; people-oriented, creating the future of the enterprise", Huangtai Optoelectronics is committed to providing customers with satisfactory products and services, and is willing to work with industry colleagues to jointly promote the development of China's optoelectronic industry.

Q1. Can I have a sample order for led light?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 

Q3. Do you have certifates about the led strip light ?

A: Yes, we have got the Rohs ,Gs certifates for all products.

Q4. Do you accept custom service ?

A: Yes, we accept custom order.

Q5.Are you a factory ?

A: Yes, we are a factory in Shenzhen. China.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 3 years warranty to our products.