1.No wiring, waterproof,corrosion,Energy-saving
2.Solar panels: 2V, 100mAh of
3.1 AA 1200mAh Batteries(not included)
4.Material: solar panels, ABS plastic


Main Material:PMMA,Alloy
Crust Color:White
Item Size:12*6.3H mm
Solar Panel:Monocrystalline silicon 60*60mm, 2V/100mA
Storage Battery: 1.2V/1200mAh AA Ni-MH(Not included)
Light Source:10*11mm/circel head/transparent, 3pcs LED
Lumen:20LM
Color Temperature:6000K(white)
Working Time:6-9 Hours
Charging Time:4.5 Hours
Function:Solar panels charge 4.5 hours under standard
sunlight, can lights 6-9h
IP Grade: IP44
Others:on/off switch

Bo size:12.5*7.1*12.5cm
CTN size:52*40*31cm
N.W./pc(kg):0.12
G.W./color bo (kg):0.19


CHARGING AND OPERATION:
1. Turn the switch to ON position. The switch is located at the bottom base of the solar panel.
2. Charge the solar product by placing it under direct sunshine for at least 8 hours.
3. The light will work automatically once the switch is in ON position. It will automatically charge under direct sunshine in the day time and illuminate at night.


NOTE:
In order to verify that the knob is correctly switched to ON position, cover the solar panel with your hand and the light will turn ON automatically.


IMPORTANT:
1. Install the solar product in an area where it can get direct sunlight.
2. Leave the switch to ON position..
3. Select an outdoor location away from other light source at night such as street lights. It may cause the product not to turn on automatically at night.
4. Duration of light depends on solar products level of sunshine eposure, geographical locations, weather conditions and the hours of daylight.


MAINTENANCE, TROUBLE SHOOTING AND BATTERY REPLACEMENT
1. Keep the solar panel clean.
2. If solar product does not light up after it has been used for around 8 12 months, replace the rechargeable batteries as they may be weak or worn out. (Battery 1pcs AA 1.2v 1200Mah, Ni-MH or same equivalent type as recommended must be used).
3. Eercise caution when replacing batteries. Open the battery to replace the old battery with a new one. Battery must be recycled or disposed of properly, dont dispose batteries in fire or trash. Contact your town or citys recycling center to find out how to properly dispose batteries.


ASSEMBLY INSTRUCTIONS
1. Insert the mounting bracket into the solar light case and secure it with small screw(#10) using a small Phillips head screwdriver. ( Screwdriver not included).
2. Install the mounting bracket on the gutter and secure with thumb screw (#9).

Wall light * 1
Screws * 3
Fied iron sheets * 1
English manual * 1