Brand：	none
Address：	China
Min.Order：	none
Supply：	none
Valid until：	Long Term

Product Details

Gledopto ZigBee 3.0 Downlight Main Specs & Features

Main Spec of ZigBee 3.0 LED Downlight Pro
Input Voltage	AC 100-240V
Power Rated	6W
Lighting Color	RGB+Dual White (WW&CW)
Lumen Flux	500~550LM (2700-6500K)
Control Tech.	ZigBee 3.0 or RF Remote Control
Remote Distance	≥30 mtr.
Housing Material	Die-cast Aluminum + PC Cover
Net Weight	350g

Lighting Features of RGB+CCT ZigBee3.0 LED Ceiling Light

Gledopto Zigbee LED Lamp and Controller directly work with H-U-E, Amazon Echo Plus, Sam-sung Smartthings, O-sram Lightify, TRÅDFRI, Homee, Google home & all other alexa devices.

> Switch between multiple lighting modes with your choice

> Rich lamplight atmosphere, give you more pure and fresh sense, available in Timmer & night light mode options

> Brightness and color temperature dimmable & adjustable from warm white 3000K to cool/cold white 6500K

> Customize your colorful life, 16 million color saturation changes, make life full of beauty

> Home or Away lighting mode, to remote control the smart LED bulb even away from home, to ensure the saftety of your home

ZigBee3.0 Lighting Control Features

>Time setting
You do not have to remember to turn off the bulb before you go to sleep. The sleep timer will automatically turn off the light after the preset time has elapsed per your settings. You also can set a wake-up time with your favorite color.

>Voice Control & Remote Control
The smart bulb Compatible with Alexa. It can help you save time and it is convenient to your life through voice control. The light works with your existing Wi-Fi or cellphone traffic. You can control your bulb no matter where you are. You can turn it on or turn it off without leaving your bed.

MORE SMART HOME CONTROLLING FEATURES

>The Plus series is ZigBee + Radio Frequency controlling design. The LED strip controllers and indoor/outdoor lamps will work with
both the RF Remote and ZigBee.
>Powerful MESH feature
Thanks to the powerful new Silicon Labs chipset being used, the Pro version ZigBee lights and controllers are now with much more
powerful MESH function. It will allow you to control as many smart lights together or individually after connected with the
ZigBee3.0 bridge. One bulb can read and synchronize the same lighting mode from another one, so to make all the lighting changes
into the same status, best for long distance & large area lighting project.

TO CONTROL GLEDOPTO PLUS/PRO WITHOUT A ZIGBEE HUB CONNECTE

>The Plus/Pro series is ZigBee + Radio Frequency controlling design. The LED strip controllers and indoor/outdoor lamps will work with both the RF Remote and ZigBee.

>These are great if you want to control your lights with just the remote or with your ZigBee hub. Sometimes you don't want to pull out the phone to open an App just to turn on the lights, the remote or the wall mounted controller can do it.
>Or if you are putting these lights somewhere outside of the WiFi coverage, e.g. a camper, backyard, garage workshop, etc., you can use the RF Remote Controller directly, no need to find to link to a ZigBee bridge.
>Auto sync & transfer.
This is the best feature for 2.4GHZ RF Remote Controlling design, it's most suitable for long distance and large area lighting application. Your RGBW or RGB+CCT color LED lights can receive the controlling signal sent from the handheld or wall mounted remote control, as long as the distance between two lamps is within 15mtr to 20mtr, the first lamp can send the signal automatically to the second lamp, and then to third lamp, and so on, until all lamps totally synced and changing the lighting
color or modes all the same at the same time.

Other Similar Indoor Voice APP Control LED Lighting Bulbs as Below ...

Smart Home Recessed Downlights 6W/9W/12W

ZigBee Bridge Control Settings

Install & Control the Indoor RGBW/CCT ZigBee Light Link (ZLL) LED Down Light

Installation

1.Turn off the Power.
2.Plug in the bulb.
3.Now you can connect it with the gateway.

Connection with Gateway:
1.Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, switch off/on the gateway and try again or
3.The Gateway found your device and you can assign it to the different rooms/zones/groups.
4.Now you can use the device.

Reset
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

2.4G RF Remote Controlling Setting -w/o a Bridge

PLUS Version ZigBee LED Downlight Controlled by 2.4G RF Remote Control

How to link & use with Remote Control

1> Within 3 seconds after power on, click the "on" button of the group to conduct code matching, and the LED light turns green, indicating successful code matching

2> Long press the "off" button of the remote control to enter the night light mode, and the brightness and color can still be adjusted at this time

3> Long press the small moon key to enter the 60 seconds delay shutdown state

4> Long press M key to enter automatic mode

How to unlink

1> If the LED is still connected to the ZigBee gateway, long press the "on" button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current color

2> If the LED is not connected in the ZigBee gateway state, long press the "on" button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times

Lighting Application

Certifications

Q1. Can I have a sample order for led light?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 1000pcs

Q3. Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?

A: Firstly, please let us know your requirements or application.
Secondly, we'll make quotation according to your requirements or our suggestions.
Thirdly, customer confirms the samples and places deposit for official order.
Fourthly, we arrange the production.

Fifthly, customers make balance payment for the order, and we arrange shipment once the payment received.

Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 2-3 years warranty for our products.

Q8: How to deal with the faulty?

A: Firstly, our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity.

For large defective products, we can arrange to repair them and resend them to you, or we can discuss the solution

including re-call according to actual situation.

* Inquiry Title
* Content
* E-mail
* Security Question	[Another problem]

Gledopto ZLL ZigBee Downlights RGB Smartthings Compatible ZigBee Ceiling Lights CCT Dimmable Recessed Downlights App Controlling

Outdoor Wall Energy Saving E

Alexa and Apple Home Kit sma

2020 New Gledopto ZigBee Cei

Smartthings Control Smart LE

2020 New Gledopto Smart LED

Wholesale SMD IP65 150W high bay light

TY4W Solar Powered High Intensity Obstruction Light

DL200S high quality Flashing Led aviation obstruction lamp,aviation obstruction lamp

HB30 solar powered marine lights

GK350 High Quality 350w led flood light

PRODUCT CAPACITY

QUALITY CONTROL

R&D CAPACITY

TRADE CAPABILITIES

Product Information

Brand：

Address：

Min.Order：

Supply：

Valid until：