Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Type： |
Array |
Product Details
GS-AWS High Quality Aviation Obstruction Ball Aircraft Warning Sphere Alerting Ball
Product Overviews
GS-AWS High Quality Aviation Obstruction Ball Aircraft Warning Sphere Alerting Ball, adopts high intensity glass fiber, the surface coating adopts reflective coatings that is corrosion and aging resistance, non-discoloured service life can be above 5 years.
Product Details
| Model Type | GS-AWS |
| Overall Size | 600(diameter) x741.5mm |
| Optional color | Red, white, orange |
| Reflection coefficient | 0.3~0.7 |
| Optional material | Glass fiber, FRP |
| Weight | 6.3kg |
| Standard | ICAO(Aerodromes Annex 14) |
Function & Features
- Adopts high reflection coefficient coatings
- Aluminum Alloy material clamp, Light weight and convenient to install.
- Glass fiber material, light weight, high strength. Tensile strength not less than 128Mpa, Bending strength not less than 230Mpa.
Dimension Drawing
Installation Info.
- At the mount point the alerting ball, wrap cable protecting bars round cables for 1000~1200mm long, with two ends of protecting bars extending 200~300mm beyong the surface of the ball.
- Fix the plastic wires which are mounted on lower hemisphere of the ball onto the cables and twist them.
- Combine the lower hemisphere with the upper hemisphere according to module codes. Turn the hemisphere during the assembly and make sure two hemispheres are joined into position.
- Insert stainless stell bolt(M12*35)and then put flat washers and spring washers around each bolt. Tighten each nut at last.
Usage Notice
- To avoid causing accident, installers should do good personel safety measurement.
- No beat, no press, no heavy weight for long time to avoide damaged, deformation, or will affect installation.
- To avoid potential drop, clamp fixed screw must be checked if tightening
Application
- Overhead transmission line, ultrahigh-tension transmission line, Rive-crossing transmission cable, ultra high cable.
Company Information
Shenzhen Green Source Light Equipment Co., Ltd is specialized in independently researching, developing and manufacturing the full range of Aviation Obstruction Light & Heliport and Helideck Light & Marine Lanterns and Equipment.
We provide full series solutions from Research to Production. We insist on offering high quality Aviation Obstruction Light & Heliport and Helideck Light & Marine Lanterns. All those products compliance to ICAO Annex 14, FAA standard, MH/T6012-2015 standard, etc. We produce High intensity/ Medium intensity / Low intensity LED & Solar Powered Aviation Obstruction Light. And Heliport or Helideck light includes aiming point light, Beacon, Insert & Elevated FATO Perimeter light, Taxiway Edge light, Guidence light, Lighted wind cone & Surface Floodlights. We design, produce and supply all these products and own some our patented inventions.
After 10 years development, we rank ahead in our industry in China.
Our Certifications
FAQ
Q1:Can I have a sample order for your products?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2: What about the lead time?
A:Sample needs 3~5days, mass production time needs 1~2 weeks. It is negotiable, if quantity more than 100.
Q3:Do you have any MOQ limit for Obstruction light order?
A:No limit, 1pc for sample checking is avaiable.
Q4:How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT worldwide Express. It usually takes 3~5days to arrive, door to door. You also could choose freight by air or by sea.
Q5:How to procced an order for Obstruction light?
A:Firstly let us know your requirement or appliction.
Secondly we will quote according to your requirement or suggested appropriate products.
Thirdly you confirm prices and check the samples.
Fourthly you confrim order and place deposit for formal order.
Then we will arrange the mass production for you.
Just feel free to contact us, we will effectively serve you and satisfy you.
Q6: is it OK to print my logo on Obstruction light product?
A: Yes, Please inform us formally before our production and confirm the design firstly based on our sample.
Q7:Do you offer guarantee for the products?
A:Yes. we offer 2~5years warranty on our products.
Q8:How to deal with the faulty?
A: Firstly, our products are produced under strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Customer Reviews total 0 items