H803TC Master controller, New IC WS2811,DMX pixel madrix led lighting control for club

AC220V;3W;

Support 170000 pixel;

0.88kg/pcs;

size L187*W117*H40;

With SD card ;

DIY control via PC;

support WS2811 UCS1903 SK6812 SH1908 SM16726 IC ect;

Eur 2pin plugs

1.Introduction

    H803TC works online or offline and switch automatically.

   When it’s offline, it reads data from SD card to control slave controllers and synchronized with AC power supply.

   When it's online, port1 transmit data that port2 received from "LED Studio Software". When software stops sending data, H803TC can detect it automatically, and read data from SD card and send it instantly.

 Auxiliary slave controller is H801RA and H801RC, auxiliary online software is “LED Studio software”, auxiliary offline software is “LED Build Software”.   

 2.Performance

(1).Works online or offline and switches automatically.
(2).Drives maximum 170000 pixels, 2 output ports, connects maximum 255 slave controllers.
(3).When it’s offline, multiple master controllers synchronize with AC power supply, achieves controlling hundreds of thousands to millions pixels.
(4).SD card supports FAT32, FAT16 format. The maximum capacity is 64G bytes.
(5).H803TC can connect to DMX console, supports encryption on number of power-on times.
(6).Supports single file playback and all files playback. Playing speed adjustable range is 1-100 frames per second, brightness adjustable range is 0-15.
(7).Transmit signal based on Ethernet protocol. The nominal transmission distance is 100 meters and it can reach to more than 25 kilometers by using a photoelectric converter.
(8).Electrical isolation and high anti-interference ability. 
(9).Flexible engineering configuration, each slave controller can control different lamps.

3.Features

1) support DMX512(1990) international standard protocol.

2) More control functions: it can control various drive IC types

3) High speed photoelectric to ensure control system safety.  

4) Control system realize more than 256 scales per color

5) Project setting agility: realize adjust the brightness and speed separately.

6) Customized software: easy to setup the lighting project system.

7) System failure self-repair function.

4. Network and optical fiber connection diagram

(1). Work offline

(2).Work online. H803TC transmits data from computer to slave controller, if there is no data sent from computer, H803TC will read data from SD card and send it to slave controller automatically.

(3).Use switch to output to multiple network interfaces, the following picture illustrates the process: computer’s wireless network card send data to wireless switch, and then transmit data to H803TC, you can also use the cable network card to send data, data is received by several H803TCs, the following picture only draws four H803TC receivers, you can use more according to actual needs.

(4).Using optical fiber to acquire further transmission distance. If slave control to slave control requires the use of optical fiber, you need to add a IP converter, the use of specific methods please refer to the slave control instructions.

Contact Details:

Yvette Yu

WhatsApp:   +86-13652300804

E-mail:sales05 @scottled.com

Skype:Yvette_yuy

Wechat: yu1072375415