Model

JS100

JS150

JS200

JS250

JS300

Roller Size

96mm(Dia.) x 100mm(W)

96mm(Dia.) x 150mm(W)

96mm(Dia.) x 200mm(W)

96mm(Dia.) x 250mm(W)

96mm(Dia.) x 300mm(W)

Effective Cylinder Width

96mm

Product Thickness

0~1.8 mm adjustable

Dial Gauge Accuracy

0.01mm

Minimum Thickness

Depending on the electrode's material and thickness, typically:
A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm
A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm

Heating Temperature

150°C maximum
Recommended Heating Rate: 1.3°C/minute
Power of Heating Element: 800W
Temperature Control :
Precision temperature controller with +/-1°C Accuracy

Working Voltage

110V - 240V AC, 50/60Hz, automatic switch for worldwide use

Roller

1. Roller diameter tolerance: 0.004mm
2. Material: Made from hardened tool steel (RC > 62) with Cr electroplated coating
3. Rolling speed: 0~40 mm /sec

Roller Surface Hardness

62 HRC 
Never roll materials with hardness > 50HRC

Compliance

CE Certificate

Warranty

Two years limited warranty with lifetime support

Warnings

1. Do not touch the surface of the rolling part of the machine when the rollers are heated up or running.
2. Never roll materials with hardness > 50HRC
3. Heating the cylinder beyond 100ºC results in roller deformation and causes inaccurate, thicker-than-usual rolling yield.
4. In order to prolong the lifespan of the roller bearings, regular lubrication is recommended. 
5. Clean roller surface for each rolling and Use acetone to clean and lubricate when not in use to avoid corrosion.
6. This rolling machine can be used under Ar gas.