IMREN H6 Introduction:

 H6 is a high-end smart LCD display charger, the product has six independent charging channels, and fulfill to charge six lithium batteries at the same time. It can choose different electric currents to meet the needs of slow charging or fast charging. When charging, the LCD screen will timely display the voltage and power status of each rechargeable battery.

 Product sets dedicated charging and discharge management circuit, sets multiple security protection, can effectively prevent reverse, short circuit, overcharge, over discharge, over-current damage to the battery, let users feel safety.

 It can charge different types DC3.6V / 3.7V cylindrical lithium battery, compatible with a wide range of practical performance.

IMREN H6 Icon:

Operating Instructions:

1) According to the product indication to connect the external charging source correctly, the system check itself and LCD full-screen be on. The charger goes into the charging standby mode.

2) Charging current shift: depending on the loaded battery quantity;When loading 6 batteries simultaneously, the charger will automatically charge by default with 0.5A, can be switched by current,set the current charge current with 0.5A / 1.0A / 2.0A , only CH1 and CH6 can charge with 2.0A.

3) Correctly access to the battery(labeled + in the channel access the positive side of the battery and labeled - in the channel access the negative side of the battery), now it is in the state of charging.The LCD screen is flashing when charging, indicates the charge status. When the battery is full charged, the charger stops work and the LCD -stops flashing.

4)  It indicates charging completed when the blue lights are all on, then user can remove the battery and turn off the power supply.

Product Characteristics:

1) Charging mode: Dual USB5V / 2A

2) Channel Query Key: can check each pass of the current battery voltage and the corresponding channel charging time

3) charging current

a. INPOU1: USB5V / 2A power supply, the product can be simultaneously charged CH1-CH3: 0.5A * 3;  1.0A * 2;  2.0A * 1 (CH1 charge)

b. INPOU2: USB5V / 2A power supply, the product can be charged simultaneously CH4-CH6: 0.5A * 3;  1.0A * 2;  2.0A * 1 (CH6 charging)

4) Through the three current switching 0.5A/1A/2A, the charger can meet different 3.7V lithium cylindrical battery charging needs.

5) This charger is applies to 10440/14500/14650/16340/16650/17650/17670/

18350/18490/18500 / 18650,20700,21700,22700,26650,26700 types of lithium batteries,and can charging 6 pcs batteries simultaneously.

6) Circuit Anti-reverse Function

When the charger is in the charging or standby state, if the channel positive and negative short circuit, cross-short circuit, the battery short circuit, or the battery positive and negative direction reverse, the product protection function starts, which won’t damage the charger.

7) Low Voltage Activation Function

When charger standby, put the low voltage battery (battery voltage≤2.9V)to access to the charging channel correctly, the charger trickle charge function starts, automatically activate the low voltage battery.

Due to low-voltage battery over discharge times, capacity, over-discharge degree, the duration of low voltage and other factors,there are big differences of the activation time. Please follow the charging process after the battery is activated.

8) Overcharge protection and automatic detection of charging function

Access to the battery to be charged. Charger starts charging function and charge the rechargeable battery if the battery voltage <4.18V.The charger starts overcharge protection and automatically stops charging when the battery is full charged.

The charger will consume a certain amount of battery power if do not remove the battery for a long time after fully charged.When the battery voltage is lower than 4.0V, the charger will restart the charging function.

Warm Tips

1) Be sure to check the charging parameters of the battery to be charged match with the charger parameters before charging the battery, or may be dangerous.

2) The charger USB interface does not have output and support external charge when using the adapter to charge the battery inside the device.

3) Make sure that the charging parameters of the device to be charged match with the product USB port parameters when using this product external charging.

4) Please regularly clean the channel in the positive, negative contact points to prevent poor contact.

5) Please do not use charger in the flammable, explosive environment.

6) Please use this charger in a dry environment.

Why Choose IMREN
1. IMREN batteries & chargers are stock in USA warehouse. (Save tax fee and shipping fee.)

2. IMREN have USA product liability insurance. (More safty for batteries & chargers.)

3. With free Plastic cases.(Easy to take and Storage.)

4. Great Reputation in vapor market.

5. IMREN attend vapeshow worldwide.

6. Competitive price.