Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Product Details
- Place of Origin:
- Guangdong, China
- Brand Name:
- ASENWARE
- Model Number:
- AW-FP300
- Product Name:
- Addressable Fire Alarm Control Panel
- Mains Supply:
- 230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A
- Operating voltage:
- 18.5 ~ 30VDC
- Capacity:
- 324 Addresses(Points)
- Sounder Circuit Output(+,-):
- 18.5 ~ 30VDC,0.5A
- Fire Alarm Output(+,-):
- 18.5 ~ 30VDC,0.5A
- Fault Output(NC,COM,NO):
- 30VDC at 2A, 125VAC at 0.5A
- Loop Distance:
- ≤1000m
- Network communication:
- RS-485,CAN
- Certificate:
- CE,LPCB,EN54
- Supply Ability:
- 1000 Set/Sets per Month
- Packaging Details
- Carton Box
- Port
- SHENZHEN
LPCB Approved Addressable Fire Alarm Control Panel
INTRODUCTION
Power Supply
Mains supply | 230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A |
Mains fuse | T3.15AL250V |
Operating voltage | 18.5 ~ 30VDC |
Recommended mains cable | Screened or standard/black mains cable, cable size 0.75mm2 |
Power rating | Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A |
Max. charging current | 1.2A |
Max. battery supply current | 4A (when the Mains is disconnected) |
Battery capacity, type and recommended model | Max. capacity 2×12V/17Ah; Min. capacity 2×12V/12Ah VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah (Power-sonic) |
Max. internal resistance of battery | 1.5Ω |
Battery fuse | F8AL250V |
Recommended battery cable | 14AWG |
Quiescent current (full loaded) | < 0.4A |
Outputs
S.C. Out (+, -) | Output voltage | 18.5 ~ 30VDC |
Max. output current | 0.5A | |
Fuse rating | F1AL250V | |
End of line resistor | 4K7 | |
Recommended type of cable | Plain unscreened cable, 1.5mm2 | |
Cable diameter | 1mm2 ~2mm2 | |
Transmission distance | ≤1500m | |
Max. number of sounders @50mA | 20 | |
F.P.E. Out (+, -) F.A. Out (+, -) | Output voltage | 18.5 ~ 30VDC |
Max. output current | 0.5A | |
Fuse rating | F1AL250V | |
End of line resistor | 4K7 | |
Recommended type of cable | Plain unscreened cable,1.5mm2 | |
Cable diameter | 1mm2 ~2mm2 | |
Transmission distance | ≤1500m | |
Fault Out (NC, COM, NO) | Contact capacity | 30VDC at 2A, 125VAC at 0.5A |
Recommended type of cable | Plain unscreened cable,1.5mm2 | |
Cable diameter | 1mm2 ~ 2mm2 | |
24VK (+, -) | Output voltage | 18.5 ~ 30VDC |
Max. output current | 0.6A | |
Fuse rating | F1AL250V | |
Recommended type of cable | Plain unscreened cable,1.5mm2 | |
Cable diameter | 1mm2 ~2mm2 |
Input
Class change (+, -) | Input mode | Passive |
Cable resistance | ≤500Ω | |
Recommended type of cable | Plain unscreened cable, 1.5mm2 | |
Cable diameter | 1mm2 ~2mm2 |
Loop
Loop Out (+, -) Loop In (+, -) | Output voltage | 16.5 ~ 30VDC, pulse |
Output current | 0 ~0.3A | |
Loop type | Class A | |
Recommended type of cable | Screened or unscreened twisted-pair, 1.5mm2 | |
Transmission distance | ≤1000m | |
Cable diameter | 1mm2 ~2mm2 |
Network Communication
RS-485 | Max. number of FIPs | 30 |
Transmission rate | 9600 bps | |
Recommended type of cable | Screened or unscreened twisted-pair, 1mm2 | |
Transmission distance | ≤1000m | |
Cable diameter | 1mm2 ~5mm2 | |
CAN | Max. number of panels | 20 |
Transmission rate | Optional: 10K, 20K, 50K and 100K bps | |
Recommended type of cable | Screened or unscreened twisted-pair, 1mm2 | |
Transmission distance | ≤1000m | |
Cable diameter | 1mm2 ~5mm2 |
Wiring Diagram
Q1: How about the quality of the products?
A: We produce every product with good quality materials, and test carefully to make sure stable quality before shipment.
Q2: Can I have a sample order?
B: Yes, Of course you can . we welcome sample order for your testing and checking products quality.Mixed samples are avaliable.
Q3: What is the shipping time?
C: Small Qty order needs 3-5 working days, big Qty order usually needs 10-5 working days after
payments arriving. That"s depends on order Qty.
Q4: How to proceed the order if I have logo to print?
D: We will prepare artwork for visual confirmation at first, if the color and position are alright,we
will make print Logo sample from silk print factory and take picture for you to comfire before mass production.
ASENWARE LTD
We are manufacturer of fire alarm and fire suppression system since 2005,our headquarter is in London,UK,with factory Shenzhen China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.
Product range:
1. Addressable fire alarm system
2. Conventional fire alarm system
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet
Customer Reviews total 0 items