Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Biobase is a professional manufacture of laboratory products from 1999.
We supply a lot kinds of laboratory equipment and medical material.
PH900P Portable Multi-parameter Water Quality Meter
Features:
- pH Mode:
Up to 5 points push-button calibration with auto-buffer recognition.
selectable pH buffer standards, resolution and temperature units.
Automatically calculates and displays electrode slope that helps youdecide whether to replace pH electrode.
- ORP Mode:
Single point offset calibration allows user adjusts displayed value toa known standard.
Absolute or Relative mV measurements provides accurate readings.
- Ion Mode:
Standard BNC connector can connects many Ion selective Electrode.
2 to 5 points push-button calibration from low to high concentrations.
selectable multiple concentration units, including ppm, mg/L, mol/L.
Direct readout ion concentration simplifies measurement process.
mV measurement allows user to check performance of ion electrode.
- Conductivity/TDS/Salinity Mode:
Up to 5-point push-button calibration allows user to uses customizedcalibration solutions.
Adjustable TDS factors, cell constants, temperature coefficients andnormalization temperature.
selectable linear or pure water compensation modes.
In salinity measurement modes, selectable practical salinity (PSU) orseawater measurement standard (ppt).
- Dissolved Oxygen Mode:
1 or 2 points auto-calibration (100% in saturated air or air-saturatedwater, 0% in zero oxygen solution).
Manual salinity and barometric pressure compensation.
selectable readout in ppm, mg/L or percentage saturation.
General Features:
- Automatic Temperature Compensation (ATC) ensures highlyaccurate measurements over the entire range.
- Calibration due reminder helps you to calibrate meter regularly.
- Automatic endpoint function freezes stable measured values.
- Help message as a operational guide to helps you understandhow to use meter.
- Setup menu lets user customize the calibration points, stabilityconditions, date and time to meet measurement requirements.
- Expanded memory stores and recalls up to 500 readings.
- Built-in real-time clock stamps stored data to meets GLP.
- Stored data can be transferred into PC via USB communication interface.
Mian types of pH Meter:
Technical Parameters:
| Model | PH900P |
| pH Range | -2.000~20.000pH |
| pH Accuracy | ±0.002pH |
| Resolution | 0.001, 0.01, 0.1pH, selectable |
| Calibration Points | Up to 5 points |
| Calibration Solutions | USA(pH1.68/4.01/7.00/10.01/12.45), NIST(pH1.68/4.01/6.86/9.18/12.45), DIN(pH1.09/4.65/6.79/9.23/12.75) |
| Ion Concentration Range | 0.001~19999ppm, mg/L, mol/L (Depending on measuring range of Ion selective Electrode) |
| Ion Concentration Accuracy | ±0.5% Full Scale (Monovalent), ±1% Full Scale (Divalent) |
| Calibration Points | 2 to 5 points |
| Calibration Solutions | 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/L, mg/L |
| mV Range | -1999.9~1999.9mV |
| mV Accuracy | ±0.2mV |
| Resolution | 0.1, 1mV, selectable |
| Conductivity Range | 0~20mS/cm (Max.200mS/cm) |
| Conductivity Accuracy | ±0.5% Full Scale |
| Calibration Points | Up to 5 points |
| Calibration Solutions | 10uS/cm, 84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm |
| TDS Range | 0~10ppt (Max. 20ppt, Depending on factor setting) |
| TDS Accuracy | ±1% Full Scale |
| TDS Factor | 0.1~1.0 (Default 0.5) |
| Salinity Range | 0~10ppt (Max.80ppt) |
| Salinity Accuracy | ±1% Full Scale |
| Salinity Measurement Modes | Practical Salinity (PSU) or Seawater Measurement Standard (ppt) |
| Resistivity Range | 0~100MΩ |
| Resistivity Accuracy | ±1% Full Scale |
| Resolution | 0.001, 0.01, 0.1, 1, Automatic |
| Temperature Coefficient | 0.0~10.0% per °C |
| Compensation Modes | Linear or Pure Water |
| Cell Constant | K=0.1, 1, 10, selectable |
| Normalization Temperature | 20°C or 25°C |
| Dissolved Oxygen Range | 0.00~20.00mg/L or ppm |
| Resolution | 0.01, 0.1mg/L, selectable |
| Dissolved Oxygen Accuracy | ±0.2mg/L (Calibration and measurement under the conditions of same temperature) |
| % Saturation of Oxygen | 0.0~200.0% |
| Accuracy | ±2.0% |
| Salinity Correction | 0~50g/L |
| Pressure Correction | 60.0~112.5kPa, 450~850mmHg |
| Temperature Range | 0~105°C, 32~221°F |
| Temperature Accuracy | ±0.5°C, ±0.9°F |
| Temperature Calibration | Manual |
| Temperature Compensation | 0~100°C, 32~212°F, Automatic or Manual; DO Mode: 0~50°C, 32~122°F, Automatic |
| Auto-Off | Manual or Automatic (10, 20, 30 minutes after last key pressed, selectable) |
| Hold Function | Manual or Automatic |
| Stability Conditions | Low or High, selectable |
| Calibration due reminder | 0 to 30 days |
| Reset Function | Yes |
| Memory | 500 data sets with Date/Time stamping |
| Output | USB Communication Interface |
| Connector | BNC and 6-pin connector |
| Power Requirements | 3×1.5V "AA" Batteries |
| LCD Display | Custom dual-display LCD (130×110mm) |
| Dimensions | 170(L)×85(W)×30(H)mm |
| Weight | 300 grams |
Certifications:
With a wooden or cardboard boxes, strong packing, you can choose Ocean shipping,air transport or express..
Our principle is to provide our perfect service to you.
our target goal is to offer you our excellent service.
With the sustained business conception of “credit is the basis, quality is the first”, we gain the high trust from customers.
BIOBASE group, founded in 1999 and been through high and stable development for 15 years, who is now with revenues of one hundred million, 1200 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base.
The products we manufacture extends to most of the laboratory items and scientific analytical equipments. Our mission is to enable our customers to make the world healthier, cleaner and safer.
BIOBASE group invests in science and technology research, aim to keep impoving products performance and quality as well as develop new products to meet customers wide requirement.
We satisfy our customers by offering comprehensive support, purchase convenience and we are ready to serves more and more BIOBASE users.
BIOBASE group, serving global distributors and its loyal end users, is becoming one of the most important scientific services supplier.
Exhibitions
| 1.Why do we cooperate with BIOBASE? |
| BIOBASE group, founded in 1999 and been through high and stable development for 15 years.The products we manufacture extends to most of the laboratory items and scientific analytical equipments. Our mission is to enable our customers to make the world healthier, cleaner and safer. |
| 2.You are an efficient dealer? |
| We are your reliable supplier. |
| 3.You are kooking for a long cooperation? |
| We are proud to say that we supply the most of our clients for decades. |
| 4.You set value on good service? |
| We will be happy to advise you in all professional questions.Importers and exporters are supported for their regular demands as well as tenders with all required information.We offer a reliable delivery schedule. |
Thanks for your visiting our products.
Please send us your enquiry with your specific needs.
E-mail:sales36 @biobase.cc
Skype: sales36 @biobase.cc
Customer Reviews total 0 items