DESCRIPTION:
Hallo EM is an ultra low-profile LED emergency downlight, providing discreet emergency
lighting where aesthetics and reliability are of prime importance. Ideally suited to offices and
other open areas within commercial buildings, the Hallo EM offers wide spacing performance
of up to 12.5m and a flush appearance to blend into most environments.
Installation into an existing ceiling is fast and simple to complete, and an optional adapter plate
is provided as standard for use in retrofit or shallow ceiling applications. Using the latest in LED
technology, Hallo EM offers up to 50,000 hours life for reduced maintenance.
This range of LED stand-alone self-contained luminaires is designed for non- maintained
operation with 3h duration.
ADVANTAGES:
1.Emergency lighting LED Driver with manual testing
2.Non maintained operation
3.Constant power output,Constant current output
4.4-year guarantee for converter
5.Electronic charge system
6.Deep discharge protection
7.Short-circuit-proof battery connect.
8.Certificated with CE
Light Source:
Materials:
Luminaire head, remote gear
and adaptor plate - polycarbonate and ABS blend
Battery - li-ion battery
Installation:
1.Flush mounting Spring retaining clips for surface installation (install from below ceiling)
2.Plug and play socket for mains supply
3.No disassembly required during installation
Operation:
Non-Maintained operation
Applications:
All recessed indoor applications
DIMENSION:
model
EMD-0330
output power 3w
light source
1pcs 3W LED
input voltage
220-240V 50/60Hz
emergency operation
3 hours
Luminous Flux:
220lm
operating temp
0-40 ℃
battery Lithium
Recharge 24 hours
SELF-TESTING:
1. Monthly to check luminaires operate at emergency mode for 5 min
2. Annual to check luminaires operate at emergency mode every 6 months for 3 hours
This product is equipped with two-color LED indicator lamp.
The status of the indicator lamp is as follows:
Test failure result retained for 7 days with mains supply failure & be indicated when the
supply is resumed. Automatically retest after 7 days.
Only disconnect the main supply AND the battery - can reset the system.
Instructions:
1. main electric indicator light and charge indicator lamp:
The power line is connected to the AC 220-240V power supply. The green indicator lights up
and flashes, indicating that the battery is charged in the lamp. The green light is bright,
indicating that the battery is full of electricity. The red indicator lights up and green light is off,
indicating the battery failure, and the battery should be replaced.
2. Test button
Press the test switch button, the LED indicator will go out and the sign will be illuminate from
its battery pack.
Connection
The 2x0.75-1.5 mm2 (H05VV-F) supply cord used while install supply connection of luminaires.
As shown in the picture
Share
Customer Reviews total 0 items