Specification:

1.product name:motion sensor solar light

2.mode:1619

3.solar panel:5V 3.2W

4.accumulator:lithium iron phosphate battery 3.2V 4500mAH

5.maximum voltage:3.65V

6.minimum voltage:2.65V

7.working current 30-1800mA

8.maximum power:6.8w

9.led specification:SMD 2835 29-30lm 4000k or 6000k

10.led quantities:48pcs

11.maximum lumens value:900lm

12.charging time:sun exposure time is greater than 8 hours

13.detection angle:120 degrees

14.detection distance:5-8 meters

15.waterproof grade:IP65

Features:

after charging it for a few hours,press the on/off button for 5 seconds to turn it on, it will go into the first mode,then each press of the button will change the operating modes with the lights flickering at the same time.

1.Micro-mode +induction mode

when someone comes,the sensor triggers circuit to start high light,the light will dim after someone leaving for 15 seconds(firstly recommended to us)

2.Induction mode

when someone comes,the sensor triggers circuit to start high light,the light will be turn off after someone leaving for 15 seconds(use in places with short lighting time)

3.Always light mode

it will always light at night with no induction function

4.Emergency light mode

commonly use for emergency lighting,such as power failure and night activities,the timing of emergency light mode is 30 minutes,the solar panels should be restarted or illuminated after the lights off

5.shutdown