description

       The emergency fixture with sensor works under normal supply of AC power, it has 7 adjustable levels of memrgency watts (3.6w, 6w, 10w, 12w, 15w, 17w, 20w set by SET button). Emergency time can be 90 min, 2, 3, 4, 5, 6 hours or customized ; when it works with microwave sensor , it will 100% light on . when movement object gets close (sensor distance is 3-12meter(can be set by jumper), and sensor angle is 120-160degree), and switch to 20%(default value) twilight when movement object leaves after 5s, 30s, 90s, 3 min(can be set by jumper); when AC normal supply shortage the emergency fixture to battery powersupply to keep light on . At the same time , microwave sensor still detect object movement , if no movement detected , the lighting will switch to 3.6w-20w ememrgency . The emergency fixture with sensor can also work as led sensor fixture(remove the battery pack) or as work as led normal waterproof fixture (remove the battery pack and sensor ). It's widely used in tunnel , railway station , metro station , supermarket , stair well, corrodor, envacuation passage,especially parking lots. 

It can be worked as 4 kinds light:

1. led emergency light with sensor

2.led emregency light(remove the sensor)

3.normal waterproof fixture(remove the battery pack and sensor)

4.led sensor fixture(remove the battery pack)
 

features

1. Adopt high grade PC base and PC cover fitting , good quality seal fpr better waterproof , high transmittance frost cover (>88%), IP65 protection rate.

2. Surface mounted or hangling installation option.

3. Adopt high Temperature Ni-CD or Ni-MH battery pack

4. Using high brightness SMD 2835/5630 led chips aslight source

5. Microwave sensor dimming function

6. Emergency watts adjustable 7 levels , 3.6w-20w.

7. Emergency duration : 90min , 2h , 3h , 4h .... or depend on sensor occupy

8. Available in 2ft 20w . 4ft  36w  and 5ft 44w

9. Approved by CE ROHS SAA abd C-Tick (RCM) and AS2293.3

10. 3 years warranty

Technical Specifications for series type

details

Sensor setting

           The sensor is innovative and avtive motion detectors with HF systerm 5.8GHz.Motion can be detected through plastic, glass and thin non-metal materials. The sensor allows energy saving without compromising confort. When used in conbination with our LED fitting. Fitting can achieve several steps dimming function. Which is perfect for using in some areas the requires a light change notice before totally switch off.

Features

1. Automatic dimming when used in combination with our LED fitting (specify models).

2. Built in adjustable twilight ratio.

3. Detection area, time dedaly and twilight ratio can be set via DIP switvh.

4. Wide detection area , range up to 16m in diameter.

2-step dimming funtion (Match with fitting)

   The sensor can provide 2-step dimming funtion , 100%-->twilight (20%)-->switch off(0% or keep on at very low illumination level). They are particularly for using in corriors, stairwells and undergroud passages where low light levels are maintained until motion is detected.

 Packaging

600mm 18-20w                                  1200mm 36-40w                            1500mm   40-44w                                  

Box:720 * 130 * 90mm                      Box: 1320*130*90mm                Box: 1620*130*90mm

Carton:740 * 430 * 90 mm                 Carton:1340*430*300mm         Carton: 1640*430*300mm

Gross Weight: 15.5kg                           Gross weight: 29kg                      Gross weight: 34kg

Net Weight: 12.5kg                               Net weight: 27kg                         Net weight: 27kg

Quantity: 9 pcs/carton                           Quantity: 9 pcs/carton                      Quantity: 9pcs/carton

Q1: Are you a factory or trade company?

     We are a factory.

Q2:What is the waranty for lamps ?

       For the lamps , we have 3 years warranty . If any quality problems on our side occured in this period , we will take on the shippings cost and replacement.

Q3: What is the CRI?

       CRI is a figure which faceback the real colors CRI with higher cost .For led tubes , the CRI is mostly 75-80Ra. But there are some suppliers write a high data to attract clients. Please note.

Q4: IS there cheap shipping cost to import to our company?

       For small order , express will be best , and for bulk order , sea ship way is best but take nach time. For urgent order, we suggest via air to airport.

Q5: How dose you factory do regarding quality control?

       Quality first, we always attach great importance to quality controlling from the very beginning to the very end . Our factory has CE SAA C-Tick certificates and as2293.3 test report.

Q6: Where is your factory located? How can I visit you ?

       Our factory is located in shnzhen, china. You can fly to shenzhen Airport directly. All our clients from home or abroad are warmly welcome to visit us.

Q7: Can we get support if we have our own market position?

       Please inform us your detailed mind on our market denamd . We will dicuss and propose helpful suggestion for you to find the best solution for lyou.