Brand: |
none |
Address: |
Guangdong Zhongshan |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
Product Details
Instructions
1.It requires proper connection of the power supply (AV220V-240V) when using the product, and the
incoming line is located at the top of the lifter terminal.
2:It will not work if without load anything. When it is installed or used, it needs to load 3-15KG lamps. If
the lamp descends to the ground, the lifter will stop without gravity and need to manually pull the wire
rope to give it gravity.
3:(1) Infrared remote control is point-to-point control. When a signal command is sent, the signal beam
of the remote control must face to the signal receiver on the lifter,then it will be workable. (2) The
coded remote control isn’t require point-to-point,it is workable within 30m effective distance.
[ Indication: There must be no obstructions between remote control signal distances ]
4:The lifter is forbidden to rise or drop directly. The correct procedure is to raise-stop-drop and stop for 3
seconds per shift, and vice versa.
5:The lifter is equipped with an electromagnetic lock. After lifting it into the right position, it has to press “stop”button to reset the electromagnetic lock.
Customer Reviews total 0 items