Feature：

Type:LW26-32GS
Application: Control circuit
Current:32A
Max. Voltage:690V
Position number: ON-OFF
Pole number: 2
Material: Silver contact, Plastic

Application

LW26 series Pad-lock type switch are derivatives of LW26 series rotary switch.Insalled in equipment where it requires a pad-lock to lock the switch in certain position.For instance, to fix the switch in ON position,to prevent the unauthorized personnel from operation the switch.

LW26GS series Pad-lock type switch complies with the GB 14048.3 and IEC 60947.3.

Working Conditions:

1.Ambient temperature not more than 50℃,the average per 24 hours not exceeds 35℃

2.Lowest temperature not less than -25 ℃

3.The altitude not more tahn 4000m.

4.At highest temprature +50 ℃,the relative humidity not over 50%,at lower temprature,higher humidity is allowed,such as at 20 ℃,90% humidity allowed.It shall be adopt the special treatment against the condensation water.

Classification:

1.According to application, the switch divided into the types of changeover of main circuit,direct control motor,master control and measurement.

2.As per operating mode, it devided into positioned type, self-recover type,positioned self-recover type.

3. According to knots of contact system:The positioned type:1-12 konts (63A only has 8 konts),self-fecover type:1-3 konts,type of direct controling motoer:1-6 konts.

4. According to rotation angle:30°.45°,60°,and 90°.

5. According to figure of panel:square,rectangular,round types.

6. Classify according to opreating mode and combination position of opreating device ON.OFF.