Brief Introduction

Mi Light LS1 4 IN 1 Smart LED Controller

4 in 1(Single color & CCT & RGB & RGBW) smart strip controller is our newly developed high-end LED controller controlled by wireless remote controller,also with smartphone control and 4G long distance control(need WiFi box).

The controller has auto-transmitting and auto-synchronizing function and with brightness(LEd1),CCT(LEDd2),RGB(LEd3) and RGBW(LEd4) output mode.

This controller adopt the widely used 2.4GHz wireless trchnology with the features of low power consumption,long signal transmitting and strong anti-interference,etc.

One compatible remote control many controllers at the same time.Widely used on the controlling of hotel lighting and home lighting.

Specifications

Link & Unlink

Link

Turn off the power,then turn on again.Press 'ON' 3 times within 3 seconds,the LED light blinks 3 times slowly when it is done.

Unlink

Turn off the power,then turn on again.Press 'ON' button 5 timers within 3 seconds.The LED light blinks 10 times swiftly when it is done.

Functions

1.Display function instruction

This controller adopt 4 bits digital tube to show the output mode,ID number and Group number.

(1) Display LEd1-4(Output Mode)

LEd1: Indicate 1 channel output,compatible to single color LED strip,brightness dimming.

LEd2: Indicate 2 channels output,compatible to CCT LED strip,brightness dimming and color temperature adjustable.

LEd3: Indicate 3 channels output,compatible to RGB LED strip,color changing and brightness dimming.

LEd4: Indicate 4 channels output,compatible to RGBW LED strip,color changing and brightness dimming.

(2) Display 0000: Indicate the current controller ID number.

(3) Display CH00: Indicate the current Group Number.

2.Function of Keys

K1 Key Button:

Short press K1 once,digital tube show current status and it will last 5 seconds,then short press K1 once again,switch to next status and it will last 5 seconds.

Long press K1 once,come into the edit mode if current status,then long press K1 once again,cancel the edit mode,under the edit mode,short press K1,switch to next edit mode.

IE:Digital tube show 1234

When come to edit mode,1 blinking means 1 can be edited,press K2 to modify the data.Short press K1 to next edit number,2 will bilnk to edit as same as previous process.When any digital tube blinking means this number can be edited,press K2 modify the data.

K2 Key Button

Under the number edit mode,this number will blink,short press K2 to modify the data.K2 is available only under the number edit mode.

Remark:K1 and K2 can adjust the output mode,any group number and ID number.Remote controller just can edit the group number.

Button Instruction of Remote Controller

ON:

Short press to turn on.

OFF:

Short press to turn off.Long press to night light mode.

SHIFT:

Switch the group & ID number,long press number button to change Group and ID number.

EDIT:

When showing the remote group number,press EDIT button,switch to remote ID number.When remote and controller showing the same ID number,press EDIT button to group edit status and choose group number according to the numbers.

S:

Long press 'S' button,'save' blinks to save the lighting status to that number.

Short press 'S' button,'select' blinks to select the lighting statue of the number.

M:

Short press 'M','Mode' blinks,then press Number(1-9) to choose the dynamic mode(M1-M9).

Brightness Slider:

Adjust the brightness(1%-100%).

CCT Slider:

Come to Static white light mode.Adjust color temperature from 2700K-6500K under the mode of LEd2 & LEd3.

Color Ring:

Change colors under LEd3 & LEd4 mode.It is not available under LEd1 & LEd2.

Saturation Slider:

Adjust brightness under LEd1 & LEd2 Mode.Adjust the saturation under LEd3 & LEd4 Mode.

UP/DOWN:

Change mode +/-

L/R:

Adjust dynamic mode speed.

Remark:

When showing the group Number,remote controller can control the corresponding linked controllers in the same group.

When showing the ID Number,remote controller can control the corresponding linked  controllers with same ID.

When showing CH00,remote can control all linked controllers.

Application

Auto-transmitting: One strip controller can transmit the signals from the remote control to another controller within 30m,as long as there is a strip controller within 30m,the remote control distance can be limitless.

Auto-synchronization: Different controllers can work synchronously when they are started at different times,controlled by the same remote,under same dynamic mode and with same speed.

Remark:1. Indicating Auto-transmitting.

             2.Controller will be auto-synchronizing in the same dynamic modes and within 30m controlling distance.

Controller connect to RGBW LED Strip Diagram

1.This item will be packaged with neutral packaging.

2.We will give advices to clients to choose the most cost-effective and suitable shipping type based on delivery time and shipping cost.  

We specialize in LED lighting field for several years,with best quality,best service and competitive price,and we are Alibaba Gold Supplier.

World Uniqueen International Trade Co.,Ltd is an export-oriented private hi-tech enterprise specialized in the application of LED product, research & development, production and marketing, with its location in City of Shenzhen. Factory founded in 1997, location in Foshan Shunde,Its covers an area of over 10,000 square meters with a population of approximately 300 employees. Over the past decade, the company has developed LED products of full functions and deployed its marketing network for domestic and overseas presence based on its powerful market management ability and a broad vision to the exterior world with the root in the home country.  

Up to now, the company has developed various LED products such as LED Bulb Light, LED Panel Light, LED Strip Light,LED Downlight,Led Controller,Solar Camping Light and Novelty Led light.  

Q: How can I get sample?

A: Sample is usually free if you place an large order.

Q: Sample delivery charge free or not?
A: Customer pays the samples delivery charges.

Q: How Can I send the inquiry ?
A: Any product you are interested in, you can directly send your information to us, or chat with us online, very welcome to you.

Q: How can I place an order?
A: After we get contact details, and confirm the samples, you can send us the PO and confirm the order, we will do and send PI for you to confirm.

For more detail requirements,please feel free to contact us,we will response you in 24 hours,thanks.

Scan the QR code to view and contact us on your phone wherever you are.