|
4 in 1(Single Color&CCT&RGB&RGBW) smart strip controller is our newly
developed high-end LED controller controlled by wireless remote controller,
also with smart phone control and 4G long distance control(need WiFi box).
The controller has auto-transmitting and auto-synchronizing function and with
brightness(LEd1) CCT(LEd2), RGB(LEd3) and RGBW(LEd4) output mode.
This controller adopt the widely used 2.4GHz wireless technology with the features of
low power consumption, long signal transmitting and strong anti-interference,etc.
One compatible remote control many controllers at the same time. Widely used on the controlling of hotel lighting and home lighting.
| Link&Unlink |
| Link: |
|
Turn off the power, then turn on again. Press ON" 3 times within 3 seconds,
The LED light blinks 3 times slowly whenit is done.
|
| Unlink: |
|
Turn off the power, then turn on again,Press "ON" button 5 times within 3 seconds.
The LED light blinks 10 times swiftly when it is done.
|
| Functions |
| 1. Display function Instruction |
| This controller adopt 4 bits digital tube to show the output mode, ID number and Group number. |
| (1) Display LEd1-4 (Output Mode) |
| LEd1: Indicate 1 channel output, compatible to single color LED strip, brightness dimming. |
|
LEd2: Indicate 2 channels output, compatible to CCT LED strip, brightness dimming
and CCT adjustable.
|
|
LEd3: Indicate 3 channels output, compatible to RGB LED strip, color changing
and brightness dimming.
|
|
LEd4: Indicate 4 channels output, compatible to RGBW LED strip, color changing
and brightness dimming.
|
| (2)Display 0000: Indicate the current controller ID number. |
| (3)Display CH00: Indicate the current Group Number. |
| 2. Function of keys |
| K1 Key Button: |
|
Short press K1 once, digital tube show current status and it will last 5 seconds,then short press K1 once again,
switch to next status and it will last 5 seconds.Long press K1 once, come into the edit mode of current status,
then long press K1 once again, cancel the edit mode. under the edit mode, short press K1, switch to next edit mode.
|
| lE: Digital tube show 1234. |
|
When come to edit mode, 1 blinking means 1 can be edited, press K2 to modify the data. Short press K1 to next
edit number, 2 will blink to edit as same as previous process .When any digital tube blinking means this number
can be edited, press K2 to modify the data.
|
| K2 Key Button: |
|
Under the number edit mode, this number will blink, short press K2 to modify the data. K2 is available only under
the number edit mode.
|
|
Remark: K1 and K2 can adjust the output mode, any group number and ID number.Remote controller just can
edit the group number.
|
| 3. Button Instruction of Remote Controller |
| ON: |
| Short press to turn on. |
| OFF: |
| Short press to turn off. Long press to night light mode. |
| SHlFT: |
| Switch the Group & ID number, long press number button to change Group |
| and ID number. |
| EDlT: |
|
When showing the remote group number, press EDIT button, switch to remoteID number.
When remote and controller showing the same ID number, press EDIT button to group edit status
and choose group number according to the
|
| numbers. |
| S: |
|
Long press "S" button, "save" blinks to save the lighting status to that number.
Short press "S" button, "select" blinks to select the lighting status of the number.
|
| M: |
| Short press "M", "Mode" blinks, then press Number( 1-9) to choose the dynamicmode(M1-M9). |
| Brightness Slider: |
| Adjust the brightness (1%- 1OO%). |
| CCT Slider: |
|
Come to Static white light mode. Adjust color temperature from 2700K 6500Kunder
the mode of LEd2 & LEd3.Color Ring:
|
| Change colors under LEd3 & LEd4 mode It is not available underLEd1&LEd2 mode. |
| Color Ring: |
| Change colors under LEd3 & LEd4 mode It is not available under LEd1&LEd2 mode. |
| Saturation Slider: |
| Adjust brightness under LEd1 & LEd2 Mode. Adjust the saturation underLEd3&L Ed4 Mode. |
| UP/DOWN: |
| Change mode +/- |
| L/R: |
| Adjust dynamic mode speed. |
| Remark: |
|
When showing the group Number, remote controller
can control the correspondinglinked controllers in the same group.
|
|
When showing the ID Number, remote controller
can control the correspondinglinked controllers with same ID.
|
| When showing CH00, remote can control all linked controllers. |
| Auto-transmitting Diagram |
|
Auto- transmitting: One strip controller can transmit
the signals from theremote control to another controller within 30m, as long as there
is a stripcontroller within 30m, the remote control distance can be limitless.
![MI-Light Smart LED Controller 4 IN 1 2.4GHz Wireless Wifi Control LS1]()      
![MI-Light Smart LED Controller 4 IN 1 2.4GHz Wireless Wifi Control LS1]()   
|
|
Share
Customer Reviews total 0 items