FUNCTION:

Ø  Can identify day and night: The consumer can adjust working state in different ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern.

Ø  Time-Delay is added continually: When it receives the second induction signals within the first induction, it will restart to time from the moment.

Ø  The switch: “ON”,“OFF”,“AUTO”.

CONNECTION:

Ø  Screw off two nails on the faceplate and unload the faceplate(refer to figure 1)

Ø  Unload the small cover directly and adjust the time and LUX knob.(refer to figure 2)

Ø  Loose the screws in the connection terminal, and then connect the power to connection terminal of sensor according to connection-wire diagram.

Ø  Install the sensor in rectangle hole, fix the screw through the mounting hole (refer to figure 3).

Ø  Install back the small cover and faceplate, switch on the power and then test it.

CONNECTION-WIRE DIAGRAM:  (See the below figure)

Our company adopts automatic machines, such as: SMD, auto component inserter, wave solder, auto injection machines,the daily output is up to 20000-30000 pcs. 

The concept of our company is"advocating new modern living environment",which focuses on researching and developing the contemporary household intelligent product.Our product can be truly satisfied for different customer's requirement,most of them are available with CE GS ROHS R&TTE REACH certification.