Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Super Quality Europe type multi-function mig welding machine (CE,CCC)
Name: Inverter CO2 GAS Shielded Welding Machine(MOSFET Type)
Model:MIG-200Y/MIG-250Y/MIG200F/MIG-25-F
Suitable Base Materials: Aluminium, Al-Mn alloy, Al-Mg alloy, Carbon steel, Stainless steel, Low-alloy steel.
Features:
Europe type multi-function mig welding machine
1,Suitable for welding metal plate with thickness above 0.8 mm.
2,Low cost but with high efficency.
3,Both output current and voltage could be adjustable to satisfy different welding requirment.
4,Small splashing, great penetration.
5,Two options of wire feeder: built-in or separated
6.Plastic box with complete accessories is optional: electrode holder ,earth clamp,cable joint.
7,Welding mask and brush.
Techanical Data:
Europe type multi-function mig welding machine
| Inverter CO2 Gas Shielded Welding Machine | ||||
| Model | MIG-200Y | MIG-250Y | MIG-200F | MIG-250F |
| Type | MOSFET | |||
| Rated input voltage (V) | single phase AC220 ±15% | three phase AC380 ±15% | single phase AC220 ±15% | three phase AC380 ±15% |
| Rated frequency (Hz) | 50/60 | |||
| Rated input current (A) | 23.5 | 10.5 | 23.5 | 10.5 |
| Output current (A) | 180 | 220 | 180 | 220 |
| Output voltage (V) | 23 | 25 | 23 | 25 |
| Duty cycle (%) | 60 | 60 | 60 | 60 |
| Efficiency (%) | 85 | 85 | 85 | 85 |
| Power factor | 0.93 | 0.93 | 0.93 | 0.93 |
| Diameter of wire (mm) | 0.8 | 1.0 | 0.8 | 1.0 |
| Type of wire feeder | built-in | built-in | separated | separated |
| Net weight of machine(KG) | 33.7 | 35.2 | 11.9 | 13.7 |
| Gross weight of machine packing(KG) | 40 | 41.3 | 13 | 14.8 |
| Gross weight of accessories packing (KG) | - | - | 16.3 | 16.3 |
| Dimension of machine (mm) | 630×315×695 | 630×315×695 | 500×210×370 | 500×210×370 |
| Dimension of packing- machine (mm) | 660×370×750 | 660×370×750 | 560×270×460 | 560×270×460 |
| Dimension of packing-wire feeder (mm) | - | - | 555×435×410 | 555×435×410 |
| including accessories: earth clamp×1pcs, cable joint×1pcs, grounding cable×3meters, pressure regulator×1pcs, MIG torch×1pcs, | ||||
| additional accessories for MIG-200F/MIG-250F: double drive wire feeder×1pcs, control cable×5meters | ||||
Electric Welding Machine Details:
01. 100% seamless, full-chip technology of the control panel,greatly increase the reliability of welding machine, at the same time Saip exclusive using over-current protection system on the control panel , prevent large current shock, prevent the welder secondary damage, even Fried tube.
02. Saip is the only stick with the most advanced of the amorphous structure transformer 200G models in China, the machine efficiency is over 32%, compared to "ferrite" is extended more than twice the life.
03. Recent wind blowing straight type design, welding machine can work in the high temperature of 60C , load rate of 100%.
04. From Germany"s technology imported from IGBT single pipe, quality guaranteed.
05. Cooperate with industry leading capacitor production enterprises, 4470uf, high quality, to ensure the high-efficiency and stable output of the electric welding machine.
06. Super-size capacity of the radiator,to improve welding efficiency by more than 26%.
07. Interlayer duct patent technology, completely prevent dust into the upper and lower plate, and cause a short circuit to improve the service life of welding machine; All lines adopt insulation layer leather processing, saip want to manufacturing the best welding.
08. Saip electric welding machine production in line with international safety standards, each welder has a grounding design.
More Display :
Welding machine Packing Information :
| Parts name | Quantity |
| Welding machine main engine | 1set |
| Electrode Holder | 1pcs |
| Earth clamp | 1pcs |
| Cable joint | 2pcs |
| Inner hexagon spanner | 1pcs |
Our Services:
1. We offer 2 year warranty, electric welding machine any non operational failure, 1 year free replacement, two years free maintenance.
2. We provide technical support for 5 years, you can feel free to contact us to solve problem, and we provide welding machine parts supply support.
3. We provide 48 hours delivery for small order, bulk purchases of delivery need to be negotiated.
4. Our company is Alibaba Gold member, we hope we can establish long-term, sustained cooperation with your company.
5. We offer OEM service, we can print your own logo on our products and packaging, and can be designed and manufactured welding machine for you.
6. Shipment, you can free to choose by sea, by air, by express.
Our Factory Show
...
Customer Reviews total 0 items